Determination of shear strength values according to EN 408: Fid-Bau Portal

Fachinformationsdienst BAUdigital

Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik

Determination of shear strength values according to EN 408

Denzler, J. K. / Glos, P.

Abstract This paper presents the results of 382 shear tests carried out according to EN 408. The test pieces consisted of spruce (Picea abies) and varied in density and ring width orientation (radial, tangential and at an angle of 45° to the steel plates). In addition pieces containing pith and knots were tested. The paper discusses problems observed when using this test configuration and shows that the test results do not support the characteristic shear strength values as given in EN 338. Moreover, the test results do not support the relationship between characteristic shear strength and characteristic bending strength as given in EN 384.

Zugriff

Verfügbarkeit in meiner Bibliothek prüfen

Bestellung bei Subito €

Seitennavigation

Dokumentinformationen

Ähnliche Titel

Exportieren, teilen und zitieren

Determination of shear strength values according to EN 408

Denzler, J. K. / Glos, P.

Abstract This paper presents the results of 382 shear tests carried out according to EN 408. The test pieces consisted of spruce (Picea abies) and varied in density and ring width orientation (radial, tangential and at an angle of 45° to the steel plates). In addition pieces containing pith and knots were tested. The paper discusses problems observed when using this test configuration and shows that the test results do not support the characteristic shear strength values as given in EN 338. Moreover, the test results do not support the relationship between characteristic shear strength and characteristic bending strength as given in EN 384.

Determination of shear strength values according to EN 408

Denzler, J. K. / Glos, P.

Abstract This paper presents the results of 382 shear tests carried out according to EN 408. The test pieces consisted of spruce (Picea abies) and varied in density and ring width orientation (radial, tangential and at an angle of 45° to the steel plates). In addition pieces containing pith and knots were tested. The paper discusses problems observed when using this test configuration and shows that the test results do not support the characteristic shear strength values as given in EN 338. Moreover, the test results do not support the relationship between characteristic shear strength and characteristic bending strength as given in EN 384.

Zugriff

Verfügbarkeit in meiner Bibliothek prüfen

Bestellung bei Subito €

Seitennavigation

Dokumentinformationen

Ähnliche Titel

Exportieren, teilen und zitieren

Dokumentinformationen

Titel:

Determination of shear strength values according to EN 408

Beteiligte:

Denzler, J. K. (Autor:in) / Glos, P. (Autor:in)

Erschienen in:

Materials and Structures ; 40

Erscheinungsdatum:

2006

ISSN:

DOI:

https://doi.org/10.1617/s11527-006-9199-4

Medientyp:

Aufsatz (Zeitschrift)

Format:

Elektronische Ressource

Sprache:

Englisch

Schlagwörter:

Density , Knots , Growth ring , Shear strength

Klassifikation:

BKL: 56.45 Baustoffkunde / 51.30 Werkstoffprüfung, Werkstoffuntersuchung

Ähnliche Titel

Determination of shear strength values according to EN 408

Denzler, J. K. / Glos, P. | British Library Online Contents | 2007

Determination of shear strength values according to EN 408

Denzler, J. K. / Glos, P. | Springer Verlag | 2006

Determination of shear strength values according to EN 408

Denzler, J. K. / Glos, P. | Online Contents | 2006

Determination of shear strength values according to EN 408

Denzler, J.K. | Online Contents | 2007

Determination of Undrained Shear Strength Characteristic Values

Cao, Z. / Wang, Y. | ASCE | 2014