Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Polyphase rock slope failure controlled by pre-existing geological structures and rock bridges
https://orcid.org/0000-0002-3323-7157
https://orcid.org/0000-0003-2449-8133
https://orcid.org/0000-0002-6437-8374
https://orcid.org/0000-0002-6286-0810
https://orcid.org/0000-0003-2872-3238
Abstract Even after decades of intensive research, assessing rock slope stability remains a challenge. One reason for this is the spatial variability of rock bridges (RBs) related to non-persistent, pre-existing geological structures, especially as the detection of RBs is generally limited to the post-failure period. Thus, the identification and classification of RBs and their inclusion in numerical studies are demanding, yet essential, since even small quantities of RBs can be decisive for rock slope stability. In our study, we demonstrate how brittle RB failure and pre-existing geological structures control the mechanisms of a polyphase rock slope failure. Therefore, we present a case study in the Austrian Alps, where three rock falls with a failure volume of 30,000 $ m^{3} $ occurred in 2019. Based on detailed process reconstructions, high-resolution terrain models, and comprehensive geological and rock mechanical investigations, we derived high-quality input for our distinct element model (DEM). By applying asymmetric Voronoi tessellation in the DEM, we modelled the coalescence of pre-existing geological structures by brittle RB failure. As a result, we identified toppling as the predominant failure mechanism at the study site. Distinctive geological structures decisively affected the failure mechanism. However, the toppling failure was only reproducible by incorporating RBs in the DEM in their pre-failure position. Finally, we found that joint persistence, and consequently the presence of potential RBs, controls which initial rock fall failure mechanism was developed. In conclusion, we state that the initial toppling failure of the Hüttschlag rock falls is controlled by non-persistent geological structures in interplay with RBs.
Polyphase rock slope failure controlled by pre-existing geological structures and rock bridges
https://orcid.org/0000-0002-3323-7157
https://orcid.org/0000-0003-2449-8133
https://orcid.org/0000-0002-6437-8374
https://orcid.org/0000-0002-6286-0810
https://orcid.org/0000-0003-2872-3238
Abstract Even after decades of intensive research, assessing rock slope stability remains a challenge. One reason for this is the spatial variability of rock bridges (RBs) related to non-persistent, pre-existing geological structures, especially as the detection of RBs is generally limited to the post-failure period. Thus, the identification and classification of RBs and their inclusion in numerical studies are demanding, yet essential, since even small quantities of RBs can be decisive for rock slope stability. In our study, we demonstrate how brittle RB failure and pre-existing geological structures control the mechanisms of a polyphase rock slope failure. Therefore, we present a case study in the Austrian Alps, where three rock falls with a failure volume of 30,000 $ m^{3} $ occurred in 2019. Based on detailed process reconstructions, high-resolution terrain models, and comprehensive geological and rock mechanical investigations, we derived high-quality input for our distinct element model (DEM). By applying asymmetric Voronoi tessellation in the DEM, we modelled the coalescence of pre-existing geological structures by brittle RB failure. As a result, we identified toppling as the predominant failure mechanism at the study site. Distinctive geological structures decisively affected the failure mechanism. However, the toppling failure was only reproducible by incorporating RBs in the DEM in their pre-failure position. Finally, we found that joint persistence, and consequently the presence of potential RBs, controls which initial rock fall failure mechanism was developed. In conclusion, we state that the initial toppling failure of the Hüttschlag rock falls is controlled by non-persistent geological structures in interplay with RBs.
Polyphase rock slope failure controlled by pre-existing geological structures and rock bridges
https://orcid.org/0000-0002-3323-7157
https://orcid.org/0000-0003-2449-8133
https://orcid.org/0000-0002-6437-8374
https://orcid.org/0000-0002-6286-0810
https://orcid.org/0000-0003-2872-3238
Abstract Even after decades of intensive research, assessing rock slope stability remains a challenge. One reason for this is the spatial variability of rock bridges (RBs) related to non-persistent, pre-existing geological structures, especially as the detection of RBs is generally limited to the post-failure period. Thus, the identification and classification of RBs and their inclusion in numerical studies are demanding, yet essential, since even small quantities of RBs can be decisive for rock slope stability. In our study, we demonstrate how brittle RB failure and pre-existing geological structures control the mechanisms of a polyphase rock slope failure. Therefore, we present a case study in the Austrian Alps, where three rock falls with a failure volume of 30,000 $ m^{3} $ occurred in 2019. Based on detailed process reconstructions, high-resolution terrain models, and comprehensive geological and rock mechanical investigations, we derived high-quality input for our distinct element model (DEM). By applying asymmetric Voronoi tessellation in the DEM, we modelled the coalescence of pre-existing geological structures by brittle RB failure. As a result, we identified toppling as the predominant failure mechanism at the study site. Distinctive geological structures decisively affected the failure mechanism. However, the toppling failure was only reproducible by incorporating RBs in the DEM in their pre-failure position. Finally, we found that joint persistence, and consequently the presence of potential RBs, controls which initial rock fall failure mechanism was developed. In conclusion, we state that the initial toppling failure of the Hüttschlag rock falls is controlled by non-persistent geological structures in interplay with RBs.
Polyphase rock slope failure controlled by pre-existing geological structures and rock bridges
Gerstner, Reinhard (Autor:in) / Fey, Christine (Autor:in) / Kuschel, Erik (Autor:in) / Valentin, Gerald (Autor:in) / Voit, Klaus (Autor:in) / Zangerl, Christian (Autor:in)
2023
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
BKL:
56.00$jBauwesen: Allgemeines
/
38.58
Geomechanik
/
38.58$jGeomechanik
/
56.20
Ingenieurgeologie, Bodenmechanik
/
56.00
Bauwesen: Allgemeines
/
56.20$jIngenieurgeologie$jBodenmechanik
RVK:
ELIB18
| British Library Conference Proceedings | 2007
Earthquake-Induced Rock Slope Failure
| British Library Conference Proceedings | 2007
Correlation between Geological Factors and Risk of Rock Slope Failure in Railroads
| Taylor & Francis Verlag | 2005
Rock slope failures - Geological reasons and methods of stabilization
| British Library Conference Proceedings | 1993