Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Analysis of a solar-assisted ejector cooling system for air conditioning
Ejector refrigeration is one of the most promising technologies because of its relative simplicity and low initial cost. In this work, a theoretical study has been carried out to assess system and refrigeration efficiencies of a solar-assisted ejector cycle using water as the operating fluid. The model was based on a 1D ejector approach, including both the refrigeration and solar collector cycles. Ejector performance was evaluated for different operating conditions. The results indicated that in order to achieve an acceptable coefficient of performance, generator temperatures should not fall below 90°C. Evaporator temperatures below 10°C and condenser temperatures over 35°C resulted in a significant drop in system efficiency, and therefore these conditions can be identified as minimal (reference) design values. The required solar collector area to provide 5 kW of cooling power was calculated for different operating conditions. Ejector dimensions were also calculated using the constant pressure mixing ejector theory.
Analysis of a solar-assisted ejector cooling system for air conditioning
Ejector refrigeration is one of the most promising technologies because of its relative simplicity and low initial cost. In this work, a theoretical study has been carried out to assess system and refrigeration efficiencies of a solar-assisted ejector cycle using water as the operating fluid. The model was based on a 1D ejector approach, including both the refrigeration and solar collector cycles. Ejector performance was evaluated for different operating conditions. The results indicated that in order to achieve an acceptable coefficient of performance, generator temperatures should not fall below 90°C. Evaporator temperatures below 10°C and condenser temperatures over 35°C resulted in a significant drop in system efficiency, and therefore these conditions can be identified as minimal (reference) design values. The required solar collector area to provide 5 kW of cooling power was calculated for different operating conditions. Ejector dimensions were also calculated using the constant pressure mixing ejector theory.
Analysis of a solar-assisted ejector cooling system for air conditioning
Varga, Szabolcs (Autor:in) / Oliveira, Armando C. (Autor:in) / Diaconu, Bogdan (Autor:in)
01.03.2009
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Experimental investigations of solar driven ejector air-conditioning system
| Online Contents | 2014
Modeling solar-driven ejector refrigeration system offering air conditioning for office buildings
| Online Contents | 2009
Modeling solar-driven ejector refrigeration system offering air conditioning for office buildings
| Online Contents | 2009
Theoretical and experimental study on solar ejector cooling system using R236fa
| Oxford University Press | 2014