Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Shear-Bending Interaction in Debonding Failures of FRP-Plated RC Beams
Fibre reinforced polymer (FRP) plates can be bonded to the tension face of a reinforced concrete (RC) beam to increase its flexural capacity. Many studies have reported premature failure by debonding of the FRP plate before the ultimate flexural capacity of the plated section is reached, and the most commonly reported debonding failure mode occurs at or near the plate end. This paper presents the results of an experimental investigation into the interaction between shear force and bending moment at the plate end at debonding for FRP plated beams by varying the length of plate. The experimental results are compared with a plate end debonding strength model recently proposed by the authors in which this interaction is ignored. A bi-linear approximation is then proposed to describe the interaction between the shear force and the bending moment at the plate end at debonding based on the present results. The effect of U strip end anchorage, used to delay or prevent plate end debonding, is also assessed in this study but it is shown that U strip end anchorage provides only limited strength enhancement.
Shear-Bending Interaction in Debonding Failures of FRP-Plated RC Beams
Fibre reinforced polymer (FRP) plates can be bonded to the tension face of a reinforced concrete (RC) beam to increase its flexural capacity. Many studies have reported premature failure by debonding of the FRP plate before the ultimate flexural capacity of the plated section is reached, and the most commonly reported debonding failure mode occurs at or near the plate end. This paper presents the results of an experimental investigation into the interaction between shear force and bending moment at the plate end at debonding for FRP plated beams by varying the length of plate. The experimental results are compared with a plate end debonding strength model recently proposed by the authors in which this interaction is ignored. A bi-linear approximation is then proposed to describe the interaction between the shear force and the bending moment at the plate end at debonding based on the present results. The effect of U strip end anchorage, used to delay or prevent plate end debonding, is also assessed in this study but it is shown that U strip end anchorage provides only limited strength enhancement.
Shear-Bending Interaction in Debonding Failures of FRP-Plated RC Beams
Smith, S. T. (Autor:in) / Teng, J. G. (Autor:in)
Advances in Structural Engineering ; 6 ; 183-199
01.08.2003
17 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Shear-Bending Interaction in Debonding Failures of FRP-Plated RC Beams
| British Library Conference Proceedings | 2003
Shear-Bending Interaction in Debonding Failures of FRP-Plated RC Beams
| Online Contents | 2003
Interfacial stresses and debonding failures in plated beams
British Library Online Contents | 2011
Preventing debonding through shear of tension face plated concrete beams
| British Library Conference Proceedings | 1997
Plate end debonding in the constant bending moment zone of plated beams
| British Library Online Contents | 2012