Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Behaviour of Filled Rectangular Steel HSS Composite Columns under Bi-Axial Bending
The purpose of this study was to investigate the behaviour of concrete-filled rectangular steel hollow structural section (HSS) columns formed by slender plates with large depth-to-width ratio subjected to bi-axial bending. As part of this study, four large concrete-filled thin-walled rib-stiffened rectangular HSS columns have been tested. Their steel tubes possess a depth-to-width ratio of 2.38 and a depth-to-thickness ratio of 175. Rib stiffeners were welded to the plate walls such that the stiffened plate width-to-thickness ratio (= 45) was less than that specified (= 60) in the Chinese design code. The results showed that local buckling of steel plate appeared after the specimen reached the ultimate capacity. Also, the fiber element analysis method is adapted to analyze the behaviour of specimen, in which the change of neutral axis position is considered. At last, the experimental results are compared with the values calculated from design codes, namely EC4, LRFD, CECS and DBJ. The results show that all codes provide safe ultimate capacities. Among them, the capacities calculated from DBJ yield results closest to the experimental ones and the other three design codes produce safety over 20%.
Behaviour of Filled Rectangular Steel HSS Composite Columns under Bi-Axial Bending
The purpose of this study was to investigate the behaviour of concrete-filled rectangular steel hollow structural section (HSS) columns formed by slender plates with large depth-to-width ratio subjected to bi-axial bending. As part of this study, four large concrete-filled thin-walled rib-stiffened rectangular HSS columns have been tested. Their steel tubes possess a depth-to-width ratio of 2.38 and a depth-to-thickness ratio of 175. Rib stiffeners were welded to the plate walls such that the stiffened plate width-to-thickness ratio (= 45) was less than that specified (= 60) in the Chinese design code. The results showed that local buckling of steel plate appeared after the specimen reached the ultimate capacity. Also, the fiber element analysis method is adapted to analyze the behaviour of specimen, in which the change of neutral axis position is considered. At last, the experimental results are compared with the values calculated from design codes, namely EC4, LRFD, CECS and DBJ. The results show that all codes provide safe ultimate capacities. Among them, the capacities calculated from DBJ yield results closest to the experimental ones and the other three design codes produce safety over 20%.
Behaviour of Filled Rectangular Steel HSS Composite Columns under Bi-Axial Bending
Guo, Lanhui (Autor:in) / Zhang, Sumei (Autor:in) / Xu, Zheng (Autor:in)
Advances in Structural Engineering ; 14 ; 295-306
01.04.2011
12 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Behaviour of Filled Rectangular Steel HSS Composite Columns Under Bi-Axial Bending
| Online Contents | 2011
Behaviour of Steel-Concrete Composite Filled Columns Under Axial and Fire Loading
| British Library Conference Proceedings | 2003
Axial load behaviour of high-strength rectangular concrete-filled steel tubular stub columns
| Online Contents | 2005
Concrete Filled Steel Tubular Columns under Axial Compression and Reversed Cyclic Bending
| British Library Online Contents | 2000
Design Model of Rectangular Concrete-Filled Steel Tubular Stub Columns under Axial Compression
| DOAJ | 2023