Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Study of Slope Stability Using Flexible Facing
Soil nailing is an improvement technique used to overhaul the nature of ground that ensures the security of new or existing slopes. Soil nailing is used for the stability of natural soil which are of weak nature. This technique is widely used in engineering because of certain advantages, like it is easy in construction, low cost, short construction period and mature construction techniques. In this present study, a series of lab tests were conducted on a physical model using six nails in a rectangular pattern. The strain was measured using the flex sensor using digital multimeter on the application of load by the hydraulic jack. In this study, sandwiched wire mesh facing material was used with and without jute gunny bag. These both were tested for maximum stress that they can bear safely. Alongside, the displacement in horizontal and vertical direction were also measured with the scale during the application of the load. The maximum stress taken by sandwiched wire mesh was 0.492 N/mm2, and when sandwiched, wire mesh was used with the jute gunny bag was 0.780 N/mm2. So, it was concluded that sandwiched wire mesh along with jute gunny bag has taken maximum stresses as compared to other condition in which just sandwiched wire mesh was used.
Study of Slope Stability Using Flexible Facing
Soil nailing is an improvement technique used to overhaul the nature of ground that ensures the security of new or existing slopes. Soil nailing is used for the stability of natural soil which are of weak nature. This technique is widely used in engineering because of certain advantages, like it is easy in construction, low cost, short construction period and mature construction techniques. In this present study, a series of lab tests were conducted on a physical model using six nails in a rectangular pattern. The strain was measured using the flex sensor using digital multimeter on the application of load by the hydraulic jack. In this study, sandwiched wire mesh facing material was used with and without jute gunny bag. These both were tested for maximum stress that they can bear safely. Alongside, the displacement in horizontal and vertical direction were also measured with the scale during the application of the load. The maximum stress taken by sandwiched wire mesh was 0.492 N/mm2, and when sandwiched, wire mesh was used with the jute gunny bag was 0.780 N/mm2. So, it was concluded that sandwiched wire mesh along with jute gunny bag has taken maximum stresses as compared to other condition in which just sandwiched wire mesh was used.
Study of Slope Stability Using Flexible Facing
Lecture Notes in Civil Engineering
Gupta, Ashok Kumar (Herausgeber:in) / Shukla, Sanjay Kumar (Herausgeber:in) / Azamathulla, Hazi (Herausgeber:in) / Tangri, Amanpreet (Autor:in) / Rawat, Saurabh (Autor:in)
Advances in Construction Materials and Sustainable Environment ; Kapitel: 61 ; 747-755
15.12.2021
9 pages
Aufsatz/Kapitel (Buch)
Elektronische Ressource
Englisch
Study of Slope Stability Using Flexible Facing
| TIBKAT | 2022
Laboratory-Based Study of Flexible Facing in Soil Nailed Slope
| Springer Verlag | 2021
Laboratory-Based Study of Flexible Facing in Soil Nailed Slope
| TIBKAT | 2022
Flexible Facing Systems for Surficial Slope Stabilisation: A Literature Review
| Springer Verlag | 2024
Numerical modelling of soil nailing combined with flexible facing for slope stabilization
| TIBKAT | 2022