Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Influence of Compatibilizator on the Operational and Technological Properties of Thermoplastic Composites Filled with Fine Barley Straw
https://orcid.org/http://orcid.org/0000-0002-9371-8702
The paper considers the problem of combining a non-polar polymer matrix and a polar agricultural origin filler in thermoplastic composites. The following types of modifiers were used during the study: Maleid F, activator BKT-2, chlorine paraffin HP1100. The research objective was to evaluate the possibility of using these modifiers in thermoplastic composites with a polymer matrix. Chopped barley straw with a particle size of 200 … 300 microns and a moisture content of 6.5% was used as a agricultural origin filler. Components compounding was carried out on a HAAKE PolyLab 600 OS two-rotary blender mixer at a temperature of 150 °C and rotor speeds of 50 rpm. Samples for physical and mechanical, and rheological characteristics were obtained by compression molding on a Gibitre hydraulic press. The following operational and technological characteristics were determined for the obtained composites samples: tensile strength and tensile modulus, water absorption, density, dependence of dynamic viscosity and dynamic elastic modulus on the rotor angular velocity. It has been shown that the introduction of 5% of the studied modifiers significantly improves the physical and mechanical characteristics, while maintaining the manufacturability of the compositions.
Influence of Compatibilizator on the Operational and Technological Properties of Thermoplastic Composites Filled with Fine Barley Straw
https://orcid.org/http://orcid.org/0000-0002-9371-8702
The paper considers the problem of combining a non-polar polymer matrix and a polar agricultural origin filler in thermoplastic composites. The following types of modifiers were used during the study: Maleid F, activator BKT-2, chlorine paraffin HP1100. The research objective was to evaluate the possibility of using these modifiers in thermoplastic composites with a polymer matrix. Chopped barley straw with a particle size of 200 … 300 microns and a moisture content of 6.5% was used as a agricultural origin filler. Components compounding was carried out on a HAAKE PolyLab 600 OS two-rotary blender mixer at a temperature of 150 °C and rotor speeds of 50 rpm. Samples for physical and mechanical, and rheological characteristics were obtained by compression molding on a Gibitre hydraulic press. The following operational and technological characteristics were determined for the obtained composites samples: tensile strength and tensile modulus, water absorption, density, dependence of dynamic viscosity and dynamic elastic modulus on the rotor angular velocity. It has been shown that the introduction of 5% of the studied modifiers significantly improves the physical and mechanical characteristics, while maintaining the manufacturability of the compositions.
Influence of Compatibilizator on the Operational and Technological Properties of Thermoplastic Composites Filled with Fine Barley Straw
https://orcid.org/http://orcid.org/0000-0002-9371-8702
The paper considers the problem of combining a non-polar polymer matrix and a polar agricultural origin filler in thermoplastic composites. The following types of modifiers were used during the study: Maleid F, activator BKT-2, chlorine paraffin HP1100. The research objective was to evaluate the possibility of using these modifiers in thermoplastic composites with a polymer matrix. Chopped barley straw with a particle size of 200 … 300 microns and a moisture content of 6.5% was used as a agricultural origin filler. Components compounding was carried out on a HAAKE PolyLab 600 OS two-rotary blender mixer at a temperature of 150 °C and rotor speeds of 50 rpm. Samples for physical and mechanical, and rheological characteristics were obtained by compression molding on a Gibitre hydraulic press. The following operational and technological characteristics were determined for the obtained composites samples: tensile strength and tensile modulus, water absorption, density, dependence of dynamic viscosity and dynamic elastic modulus on the rotor angular velocity. It has been shown that the introduction of 5% of the studied modifiers significantly improves the physical and mechanical characteristics, while maintaining the manufacturability of the compositions.
Influence of Compatibilizator on the Operational and Technological Properties of Thermoplastic Composites Filled with Fine Barley Straw
Lecture Notes in Civil Engineering
Klyuev, Sergey Vasil'yevich (Herausgeber:in) / Lesovik, Valeriy Stanislavovich (Herausgeber:in) / Vatin, Nikolay Ivanovich (Herausgeber:in) / Kuzmin, A. M. (Autor:in)
International Scientific Conference on Innovations and Technologies in Construction ; 2020 ; Belgorod, Russia
31.07.2020
8 pages
Aufsatz/Kapitel (Buch)
Elektronische Ressource
Englisch
Technological and thermal properties of thermoplastic composites filled with heat-treated alder wood
| BASE | 2016
Wood-Filled Thermoplastic Composites
| British Library Online Contents | 1998
Influence of pretreatment of rice straw on hydration of straw fiber filled cement based composites
| Online Contents | 2016
Influence of pretreatment of rice straw on hydration of straw fiber filled cement based composites
| British Library Online Contents | 2016