Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Modeling of cutter displacements during ball end milling of inclined surfaces
This work concentrates on the modeling of cutter’s displacements during ball end milling with various surface inclinations. The cutter’s displacements (vibrations) model including: tool’s geometry, cutting conditions, surface inclination angle, run out and tool’s deflections (induced by the cutting forces) was proposed. Subsequently, this model was validated empirically during the milling tests with various feed per tooth (fz), depth of cut (ap) and surface inclination angle (α) values. Experiments were carried out with the application of laser displacement sensor and force dynamometer. The research revealed that cutter’s displacements are strongly affected by the cutter’s run out and surface inclination. This observation is also confirmed by the developed model.
Modeling of cutter displacements during ball end milling of inclined surfaces
This work concentrates on the modeling of cutter’s displacements during ball end milling with various surface inclinations. The cutter’s displacements (vibrations) model including: tool’s geometry, cutting conditions, surface inclination angle, run out and tool’s deflections (induced by the cutting forces) was proposed. Subsequently, this model was validated empirically during the milling tests with various feed per tooth (fz), depth of cut (ap) and surface inclination angle (α) values. Experiments were carried out with the application of laser displacement sensor and force dynamometer. The research revealed that cutter’s displacements are strongly affected by the cutter’s run out and surface inclination. This observation is also confirmed by the developed model.
Modeling of cutter displacements during ball end milling of inclined surfaces
Archiv.Civ.Mech.Eng
Wojciechowski, S. (Autor:in) / Chwalczuk, T. (Autor:in) / Twardowski, P. (Autor:in) / Krolczyk, G. M. (Autor:in)
Archives of Civil and Mechanical Engineering ; 15 ; 798-805
01.12.2015
8 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Modeling of cutter displacements during ball end milling of inclined surfaces
| British Library Online Contents | 2015
Flank Milling for Blisk with a Barrel Ball Milling Cutter
| British Library Online Contents | 2009
Grinding Process of Ball End Milling Cutter Flank
| British Library Online Contents | 2018
Modeling of tool wear for ball end milling cutter based on shape mapping
| Springer Verlag | 2012
Milling cutter detection method, milling cutter detection device and milling machine
| Europäisches Patentamt | 2020