Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
A successive approximation method for thermo-elasto-plastic analysis of a reinforced functionally graded rotating disc
Thermo-elasto-plastic analysis of a rotating disc made of Functionally Graded Materials (FGMs) is studied in this paper using Successive Approximation Method (SAM). The plane stress condition is assumed for formulation of the problem. After computation of effective material properties based on modified mixture rule, the governing equations are derived analytically and then is solved using the Differential Quadratic Method (DQM). After obtaining the displacements and stresses, the yield conditions are calculated by von-Mises failure criteria. The rotating disc is made of an Aluminum–Silicon Carbide functionally graded material. The plastic behavior of Aluminum is considered as strain hardening one. The effects of angular speed, percentage of ceramic particles, particle reinforcement power, and boundary conditions such as temperature gradient on the radial and tangential thermo-elasto-plastic strains, stresses, and equivalent stresses is investigated. The results show that the radial stresses through the disc are significantly less than tangential stresses, therefor the tangential stresses has a significant effect on the equivalent stress and yield conditions.
A successive approximation method for thermo-elasto-plastic analysis of a reinforced functionally graded rotating disc
Thermo-elasto-plastic analysis of a rotating disc made of Functionally Graded Materials (FGMs) is studied in this paper using Successive Approximation Method (SAM). The plane stress condition is assumed for formulation of the problem. After computation of effective material properties based on modified mixture rule, the governing equations are derived analytically and then is solved using the Differential Quadratic Method (DQM). After obtaining the displacements and stresses, the yield conditions are calculated by von-Mises failure criteria. The rotating disc is made of an Aluminum–Silicon Carbide functionally graded material. The plastic behavior of Aluminum is considered as strain hardening one. The effects of angular speed, percentage of ceramic particles, particle reinforcement power, and boundary conditions such as temperature gradient on the radial and tangential thermo-elasto-plastic strains, stresses, and equivalent stresses is investigated. The results show that the radial stresses through the disc are significantly less than tangential stresses, therefor the tangential stresses has a significant effect on the equivalent stress and yield conditions.
A successive approximation method for thermo-elasto-plastic analysis of a reinforced functionally graded rotating disc
Archiv.Civ.Mech.Eng
Kholdi, Mohsen (Autor:in) / Saeedi, Soheil (Autor:in) / Zargar Moradi, Seyed Ali (Autor:in) / Loghman, Abbas (Autor:in) / Arefi, Mohammad (Autor:in)
27.10.2021
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Thermo-Elasto-Plastic Stresses of Functionally Graded Material Plate with a Substrate and a Coating
| British Library Online Contents | 2002
Elasto-plastic thermal stress analysis of functionally graded hyperbolic discs
| British Library Online Contents | 2017
Elastic–plastic stress analysis of rotating functionally graded discs
| Elsevier | 2015
Elastic–plastic stress analysis of rotating functionally graded discs
| Online Contents | 2015