Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Study on constitutive model and deformation mechanism in high speed cutting Inconel718
The nickel-based alloy Inconel718 is a multi-component complex alloy. There exists complex cutting deformation, higher cutting temperature, higher cutting force and formation of serrated chip in the machining process. However, the formation time of every saw tooth unit in serrated chip is very short. It is difficult to use traditional method to analyze the chip at any time. Simulation analysis, integrated with the experimental results, was used to study the whole process of cutting deformation. The Johnson—Cook (JC) constitutive model of Inconel718 under high speed and high strain rate is established through split Hopkinson pressure bar (SHPB) test. The finite element method was used to study the deformation process. Combining the analysis of metallographic pictures which were obtained in the cutting experiment, the plastic behavior evolution of material in the cutting zone is deeply studied to further reveal the forming mechanism of serrated chip. The results showed that the local temperature in the cutting zone increased rapidly. The appearance of thermal softening of materials led to the change of stress distribution in the cutting zone. The thermoplastic shear instability further appeared which resulted in the shear localization, subsequently leading to the uneven deformation of chip and then serrated chip formed.
Study on constitutive model and deformation mechanism in high speed cutting Inconel718
The nickel-based alloy Inconel718 is a multi-component complex alloy. There exists complex cutting deformation, higher cutting temperature, higher cutting force and formation of serrated chip in the machining process. However, the formation time of every saw tooth unit in serrated chip is very short. It is difficult to use traditional method to analyze the chip at any time. Simulation analysis, integrated with the experimental results, was used to study the whole process of cutting deformation. The Johnson—Cook (JC) constitutive model of Inconel718 under high speed and high strain rate is established through split Hopkinson pressure bar (SHPB) test. The finite element method was used to study the deformation process. Combining the analysis of metallographic pictures which were obtained in the cutting experiment, the plastic behavior evolution of material in the cutting zone is deeply studied to further reveal the forming mechanism of serrated chip. The results showed that the local temperature in the cutting zone increased rapidly. The appearance of thermal softening of materials led to the change of stress distribution in the cutting zone. The thermoplastic shear instability further appeared which resulted in the shear localization, subsequently leading to the uneven deformation of chip and then serrated chip formed.
Study on constitutive model and deformation mechanism in high speed cutting Inconel718
Archiv.Civ.Mech.Eng
Hao, ZhaoPeng (Autor:in) / Li, JiNing (Autor:in) / Fan, YiHang (Autor:in) / Ji, FangFang (Autor:in)
Archives of Civil and Mechanical Engineering ; 19 ; 439-452
01.06.2019
14 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Study on constitutive model and deformation mechanism in high speed cutting Inconel718
| British Library Online Contents | 2019
Room Temperature Deformation Behavior of Inconel718
| British Library Online Contents | 2005
Research on tool wear based on multi-scale simulation in high speed cutting Inconel718
| Springer Verlag | 2018
Research on tool wear based on multi-scale simulation in high speed cutting Inconel718
| British Library Online Contents | 2018
Creep behaviors and mechanisms of Inconel718 and Allvac718plus
| British Library Online Contents | 2017