Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Optimization of MQL Parameters During Turning for the Minimization of Flank Wear using DoE, PSO and SAA
Abstract The concept of minimum quantity lubrication (MQL) has come into practice since a decade ago in order to overcome the disadvantages of flood cooling. This experimental investigation deals with the effects of MQL parameters during turning for the minimization of flank wear with surface roughness as constraint. The parameters of MQL selected are density of coolant, mass flow rate of coolant and pressure of air. The selected MQL parameters are varied through four levels. The flank wear values of the cutting inserts after machining are observed and recorded. The best levels of MQL parameters are identified by using Taguchi’s design of experiments. A validation experiment is conducted with the identified best levels of parameters and the corresponding flank wear value is recorded. This analysis further inter-relates the performances of particle swarm optimization and simulated annealing algorithm (SAA). The result obtained from SAA is comparatively better than that of the results obtained from other techniques.
Optimization of MQL Parameters During Turning for the Minimization of Flank Wear using DoE, PSO and SAA
Abstract The concept of minimum quantity lubrication (MQL) has come into practice since a decade ago in order to overcome the disadvantages of flood cooling. This experimental investigation deals with the effects of MQL parameters during turning for the minimization of flank wear with surface roughness as constraint. The parameters of MQL selected are density of coolant, mass flow rate of coolant and pressure of air. The selected MQL parameters are varied through four levels. The flank wear values of the cutting inserts after machining are observed and recorded. The best levels of MQL parameters are identified by using Taguchi’s design of experiments. A validation experiment is conducted with the identified best levels of parameters and the corresponding flank wear value is recorded. This analysis further inter-relates the performances of particle swarm optimization and simulated annealing algorithm (SAA). The result obtained from SAA is comparatively better than that of the results obtained from other techniques.
Optimization of MQL Parameters During Turning for the Minimization of Flank Wear using DoE, PSO and SAA
Barnabas, J. K. (Autor:in) / Tamizharasan, T. (Autor:in)
Journal of The Institution of Engineers (India): Series C ; 93 ; 133-139
30.05.2012
7 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Taguchi optimization of surface roughness and flank wear during the turning of DIN 1.2344 tool steel
| British Library Online Contents | 2017
Artificial neural network based prediction of flank wear in turning
| British Library Online Contents | 2005
Microstructural impact on flank wear during turning of various Ti-6Al-4V alloys
| British Library Online Contents | 2017
Artificial neural network based prediction of flank wear in turning
| British Library Online Contents | 2005
| British Library Online Contents | 2018