Electrical Curing Application on Cement-based Mortar with Different Stress Intensity: Fid-Bau Portal

Fachinformationsdienst BAUdigital

Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik

Electrical Curing Application on Cement-based Mortar with Different Stress Intensity

Uygunoğlu, Tayfun / Hocaoğlu, İsmail / Topçu, İlker Bekir

Abstract In this study, the effects of different stress intensity on the electrical resistivity of hardening (setting) cement-based mortar were investigated. In experiments, four different mould (5 × 5 × 10 cm, 5 × 5 × 15 cm, 5 × 5 × 20 cm and 5 × 5 × 25 cm) were used. Different combinations of stress intensity (7.5, 15, 22.5 and 30 V) were used on mixtures. The measurements were done at room temperature. Electrical resistivity and setting time of the specimens with and without electric current application were also investigated. Moreover, specific setting hydration temperature was measured by using thermocouple. As a result, electric current application can be used for obtaining to rapid setting time on the mortar with high volume stress intensity.

Zugriff

Zugriff prüfen

Verfügbarkeit in meiner Bibliothek prüfen

Bestellung bei Subito €

Seitennavigation

Dokumentinformationen

Ähnliche Titel

Exportieren, teilen und zitieren

Electrical Curing Application on Cement-based Mortar with Different Stress Intensity

Uygunoğlu, Tayfun / Hocaoğlu, İsmail / Topçu, İlker Bekir

Abstract In this study, the effects of different stress intensity on the electrical resistivity of hardening (setting) cement-based mortar were investigated. In experiments, four different mould (5 × 5 × 10 cm, 5 × 5 × 15 cm, 5 × 5 × 20 cm and 5 × 5 × 25 cm) were used. Different combinations of stress intensity (7.5, 15, 22.5 and 30 V) were used on mixtures. The measurements were done at room temperature. Electrical resistivity and setting time of the specimens with and without electric current application were also investigated. Moreover, specific setting hydration temperature was measured by using thermocouple. As a result, electric current application can be used for obtaining to rapid setting time on the mortar with high volume stress intensity.

Electrical Curing Application on Cement-based Mortar with Different Stress Intensity

Uygunoğlu, Tayfun / Hocaoğlu, İsmail / Topçu, İlker Bekir

Abstract In this study, the effects of different stress intensity on the electrical resistivity of hardening (setting) cement-based mortar were investigated. In experiments, four different mould (5 × 5 × 10 cm, 5 × 5 × 15 cm, 5 × 5 × 20 cm and 5 × 5 × 25 cm) were used. Different combinations of stress intensity (7.5, 15, 22.5 and 30 V) were used on mixtures. The measurements were done at room temperature. Electrical resistivity and setting time of the specimens with and without electric current application were also investigated. Moreover, specific setting hydration temperature was measured by using thermocouple. As a result, electric current application can be used for obtaining to rapid setting time on the mortar with high volume stress intensity.

Zugriff

Zugriff prüfen

Verfügbarkeit in meiner Bibliothek prüfen

Bestellung bei Subito €

Seitennavigation

Dokumentinformationen

Ähnliche Titel

Exportieren, teilen und zitieren

Dokumentinformationen

Titel:

Electrical Curing Application on Cement-based Mortar with Different Stress Intensity

Beteiligte:

Uygunoğlu, Tayfun (Autor:in) / Hocaoğlu, İsmail (Autor:in) / Topçu, İlker Bekir (Autor:in)

Erschienen in:

Proceedings of 3rd International Sustainable Buildings Symposium (ISBS 2017) ; 462-468

Lecture Notes in Civil Engineering ; 7

Erscheinungsdatum:

01.01.2018

Format / Umfang:

7 pages

ISBN:

978-3-319-64349-6 , 978-3-319-64348-9

ISSN:

2366-2557 , 2366-2565

DOI:

https://doi.org/10.1007/978-3-319-64349-6_37

Medientyp:

Aufsatz/Kapitel (Buch)

Format:

Elektronische Ressource

Sprache:

Englisch

Schlagwörter:

Electrical resistivity , Mortar , Stress intensity , Hydration time Engineering , Building Construction and Design , Sustainable Development , Energy Efficiency , Climate Change Management and Policy

Ähnliche Titel

QUICK-CURING CEMENT COMPOSITION AND QUICK-CURING MORTAR

TAKAYAMA KOHEI | Europäisches Patentamt | 2019

Freier Zugriff

RAPID CURING POLYMER CEMENT COMPOSITION AND RAPID CURING POLYMER CEMENT MORTAR

AKAE SHINYA / SATAKE SHINYA / UCHIDA SATOSHI | Europäisches Patentamt | 2018

Freier Zugriff

WET CURING WATER OF CONCRETE AND CEMENT MORTAR, AND CURING METHOD FOR CONCRETE AND CEMENT MORTAR USING THE SAME

OTSUKI NOBUAKI / NISHIDA TAKAHIRO / SAITO ATSUSHI et al. | Europäisches Patentamt | 2019

Freier Zugriff

CEMENT ADMIXTURE, QUICK CURING MORTAR CONCRETE MATERIAL, QUICK CURING MORTAR CONCRETE COMPOSITION, AND CURED BODY

SASAKI TAKASHI / YAMAGISHI TAKANORI / ISOGAI TAKEHIKO et al. | Europäisches Patentamt | 2023

Freier Zugriff

Effect of electrical curing application on setting time of concrete with different stress intensity

Uygunoğlu, Tayfun / Hocaoğlu, İsmail | British Library Online Contents | 2018