Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Effect of Gradation and Stress Ratio on Liquefaction Response of Ennore Sand
Liquefaction behavior of soil is governed by several factors such as grain size, fines content, relative density, the magnitude of shear stress or strain, and loading conditions. Cyclic stress ratio (CSR) is one of the most important parameters that govern the liquefaction potential of sands during seismic events. The present experimental study investigates the effect of cyclic stress ratio on the liquefaction response of cohesionless soil. Five different types of specimens (S1–S5) were prepared including well-graded and poorly graded sands having definite proportions of three commercially available grades of Ennore sand. Grain size distribution (GSD) parameters such as coefficient of uniformity (Cu) and co-efficient of curvature (Cc) were also determined for all the five specimens. A series of stress-controlled cyclic simple shear tests were performed on these specimens prepared at 60% relative density over a wide range of CSR (0.1, 0.075, 0.05, and 0.03). The criteria for the liquefaction initiation in the present study was chosen as ru = 1.0; where ru = excess pore water pressure ratio. The number of cycles to liquefaction was observed to increase with the reduction in CSR value for all five specimens. Well-graded specimen (S4) exhibited more resistance toward liquefaction than uniformly graded specimens (S1, S2, S3, and S5) at same CSR values. The shear modulus (G) of all the specimens was observed to decrease with the reduction in mean particle diameter (D50) for all CSR values.
Effect of Gradation and Stress Ratio on Liquefaction Response of Ennore Sand
Liquefaction behavior of soil is governed by several factors such as grain size, fines content, relative density, the magnitude of shear stress or strain, and loading conditions. Cyclic stress ratio (CSR) is one of the most important parameters that govern the liquefaction potential of sands during seismic events. The present experimental study investigates the effect of cyclic stress ratio on the liquefaction response of cohesionless soil. Five different types of specimens (S1–S5) were prepared including well-graded and poorly graded sands having definite proportions of three commercially available grades of Ennore sand. Grain size distribution (GSD) parameters such as coefficient of uniformity (Cu) and co-efficient of curvature (Cc) were also determined for all the five specimens. A series of stress-controlled cyclic simple shear tests were performed on these specimens prepared at 60% relative density over a wide range of CSR (0.1, 0.075, 0.05, and 0.03). The criteria for the liquefaction initiation in the present study was chosen as ru = 1.0; where ru = excess pore water pressure ratio. The number of cycles to liquefaction was observed to increase with the reduction in CSR value for all five specimens. Well-graded specimen (S4) exhibited more resistance toward liquefaction than uniformly graded specimens (S1, S2, S3, and S5) at same CSR values. The shear modulus (G) of all the specimens was observed to decrease with the reduction in mean particle diameter (D50) for all CSR values.
Effect of Gradation and Stress Ratio on Liquefaction Response of Ennore Sand
Lecture Notes in Civil Engineering
Sitharam, T. G. (Herausgeber:in) / Dinesh, S. V. (Herausgeber:in) / Jakka, Ravi (Herausgeber:in) / Pal, Homit Singh (Autor:in) / Hussain, Majid (Autor:in) / Shrivastava, Aparna (Autor:in) / Sachan, Ajanta (Autor:in)
01.04.2021
13 pages
Aufsatz/Kapitel (Buch)
Elektronische Ressource
Englisch
Effect of Plastic Fines on Geotechnical Behavior of Ennore Sand
TIBKAT | 2021
|Effect of Sand Gradation and Fines Type on Liquefaction Behaviour of Sand-Fines Mixture
British Library Conference Proceedings | 2008
|Effect of Non-plastic Fines Content and Gradation on the Liquefaction Response of Chlef Sand
Springer Verlag | 2024
|Effect of Plastic Fines on Geotechnical Behavior of Ennore Sand
Springer Verlag | 2021
|