Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Optimization parameters for electro discharge machining on Nimonic 80A alloy using grey relational analysis
https://orcid.org/http://orcid.org/0009-0001-7649-9085
Abrasive powder-mixed electrode-coated electrical discharge machining (APMEC-EDM) is a hybrid manufacturing process that involves using a abrasive powder mixed dielectric fluid and coated electrodes and combining benefits of both mechanical and thermal interactions. Present study aims to use a new performance assessment technique, gray relational analysis (GRA), to assess the influence of optimizing the APMEC-EDM performance on Nimonic80A Superalloy. Here, five control factors are considered as machining parameters: pulse current (A), pulse on-time (Ton), pulse off-time (Toff), Inter Electrode gap (mm), and aluminum powder concentration (g/L). The GRA L27 Orthogonal Array DOE can determine best parameters for multiple responses. GRA is employed to acquire a single performance index, and gray correlational class is used to optimize the APMEC-EDM process using a gray correlation coefficient with a lower tool wear rate, radial overcut, and higher material removal rate. The multi-objective optimization optimum values are Current at 15 A, Inter Electrode Gap at 2 mm, and Powder concentration in dielectric at 9 g/l, Ton at 300 μs, and Toff at 90 μs.
Optimization parameters for electro discharge machining on Nimonic 80A alloy using grey relational analysis
https://orcid.org/http://orcid.org/0009-0001-7649-9085
Abrasive powder-mixed electrode-coated electrical discharge machining (APMEC-EDM) is a hybrid manufacturing process that involves using a abrasive powder mixed dielectric fluid and coated electrodes and combining benefits of both mechanical and thermal interactions. Present study aims to use a new performance assessment technique, gray relational analysis (GRA), to assess the influence of optimizing the APMEC-EDM performance on Nimonic80A Superalloy. Here, five control factors are considered as machining parameters: pulse current (A), pulse on-time (Ton), pulse off-time (Toff), Inter Electrode gap (mm), and aluminum powder concentration (g/L). The GRA L27 Orthogonal Array DOE can determine best parameters for multiple responses. GRA is employed to acquire a single performance index, and gray correlational class is used to optimize the APMEC-EDM process using a gray correlation coefficient with a lower tool wear rate, radial overcut, and higher material removal rate. The multi-objective optimization optimum values are Current at 15 A, Inter Electrode Gap at 2 mm, and Powder concentration in dielectric at 9 g/l, Ton at 300 μs, and Toff at 90 μs.
Optimization parameters for electro discharge machining on Nimonic 80A alloy using grey relational analysis
https://orcid.org/http://orcid.org/0009-0001-7649-9085
Abrasive powder-mixed electrode-coated electrical discharge machining (APMEC-EDM) is a hybrid manufacturing process that involves using a abrasive powder mixed dielectric fluid and coated electrodes and combining benefits of both mechanical and thermal interactions. Present study aims to use a new performance assessment technique, gray relational analysis (GRA), to assess the influence of optimizing the APMEC-EDM performance on Nimonic80A Superalloy. Here, five control factors are considered as machining parameters: pulse current (A), pulse on-time (Ton), pulse off-time (Toff), Inter Electrode gap (mm), and aluminum powder concentration (g/L). The GRA L27 Orthogonal Array DOE can determine best parameters for multiple responses. GRA is employed to acquire a single performance index, and gray correlational class is used to optimize the APMEC-EDM process using a gray correlation coefficient with a lower tool wear rate, radial overcut, and higher material removal rate. The multi-objective optimization optimum values are Current at 15 A, Inter Electrode Gap at 2 mm, and Powder concentration in dielectric at 9 g/l, Ton at 300 μs, and Toff at 90 μs.
Optimization parameters for electro discharge machining on Nimonic 80A alloy using grey relational analysis
Int J Interact Des Manuf
Rajesh, Maddipati (Autor:in) / Sri, M. Naga Swapna (Autor:in) / Jeyakrishnan, S. (Autor:in) / Anusha, P. (Autor:in) / Manikanta, Javvadi Eswara (Autor:in) / Sateesh, N. (Autor:in) / Nookaraju, B. Ch. (Autor:in) / subbiah, Ram (Autor:in) / Vijayakumar, S. (Autor:in)
01.04.2024
14 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
On Titanium Powder Mixed Electric Discharge Machining of Nimonic C-263
| Springer Verlag | 2023
Surface roughness analysis on machining of nimonic C–263 alloy using ANN and RSM techniques
| British Library Online Contents | 2011
| British Library Online Contents | 2016