Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Taring the Unloading of Grain Material from the Loading Hopper
https://orcid.org/http://orcid.org/0000-0003-0266-4727
https://orcid.org/http://orcid.org/0000-0003-3612-6898
https://orcid.org/http://orcid.org/0000-0002-5548-8483
The harvest of winter rye may contain poisonous ergot sclerotia. Existing grain cleaning machines do not provide the separation of ergot sclerotia from grain in one technological process. Ergot sclerotia are less dense than that of rye grain. To isolate ergot sclerotia from rye grain by density, aqueous solutions of salts can be used. For this, an experimental machine MVS-1.0 has been developed, consisting of a loading hopper with a feeder, a bath, unloading devices for rye seeds and waste. Research on calibrating the unloading of grain material from a loading hopper with a width of 0.1 m was carried out on an experimental installation. For this, grain of winter rye of the Falenskaya 4 variety was used. To calibrate the unloading of grain material from the loading hopper of the experimental installation, the grain load was determined for the MVS-1.0 machine. The prototype machine MVS-1.0 has a loading hopper width of 0.415 m. It has been found that with an increase in the gap in the outlet of the loading hopper from 10.0 to 30.0 10–3 m, the total grain load increases from 1006.6 to 10788.4 kg/h. It is assumed that in the MVS -1.0 machine with grain loads of 1006.6…2195.6 kg/h, corresponding to the size of the set gap in the outlet window of the loading hopper 10.0…15.0 10–3 m, the allocation of ergot sclerotia will be ensured in one technological process.
Taring the Unloading of Grain Material from the Loading Hopper
https://orcid.org/http://orcid.org/0000-0003-0266-4727
https://orcid.org/http://orcid.org/0000-0003-3612-6898
https://orcid.org/http://orcid.org/0000-0002-5548-8483
The harvest of winter rye may contain poisonous ergot sclerotia. Existing grain cleaning machines do not provide the separation of ergot sclerotia from grain in one technological process. Ergot sclerotia are less dense than that of rye grain. To isolate ergot sclerotia from rye grain by density, aqueous solutions of salts can be used. For this, an experimental machine MVS-1.0 has been developed, consisting of a loading hopper with a feeder, a bath, unloading devices for rye seeds and waste. Research on calibrating the unloading of grain material from a loading hopper with a width of 0.1 m was carried out on an experimental installation. For this, grain of winter rye of the Falenskaya 4 variety was used. To calibrate the unloading of grain material from the loading hopper of the experimental installation, the grain load was determined for the MVS-1.0 machine. The prototype machine MVS-1.0 has a loading hopper width of 0.415 m. It has been found that with an increase in the gap in the outlet of the loading hopper from 10.0 to 30.0 10–3 m, the total grain load increases from 1006.6 to 10788.4 kg/h. It is assumed that in the MVS -1.0 machine with grain loads of 1006.6…2195.6 kg/h, corresponding to the size of the set gap in the outlet window of the loading hopper 10.0…15.0 10–3 m, the allocation of ergot sclerotia will be ensured in one technological process.
Taring the Unloading of Grain Material from the Loading Hopper
https://orcid.org/http://orcid.org/0000-0003-0266-4727
https://orcid.org/http://orcid.org/0000-0003-3612-6898
https://orcid.org/http://orcid.org/0000-0002-5548-8483
The harvest of winter rye may contain poisonous ergot sclerotia. Existing grain cleaning machines do not provide the separation of ergot sclerotia from grain in one technological process. Ergot sclerotia are less dense than that of rye grain. To isolate ergot sclerotia from rye grain by density, aqueous solutions of salts can be used. For this, an experimental machine MVS-1.0 has been developed, consisting of a loading hopper with a feeder, a bath, unloading devices for rye seeds and waste. Research on calibrating the unloading of grain material from a loading hopper with a width of 0.1 m was carried out on an experimental installation. For this, grain of winter rye of the Falenskaya 4 variety was used. To calibrate the unloading of grain material from the loading hopper of the experimental installation, the grain load was determined for the MVS-1.0 machine. The prototype machine MVS-1.0 has a loading hopper width of 0.415 m. It has been found that with an increase in the gap in the outlet of the loading hopper from 10.0 to 30.0 10–3 m, the total grain load increases from 1006.6 to 10788.4 kg/h. It is assumed that in the MVS -1.0 machine with grain loads of 1006.6…2195.6 kg/h, corresponding to the size of the set gap in the outlet window of the loading hopper 10.0…15.0 10–3 m, the allocation of ergot sclerotia will be ensured in one technological process.
Taring the Unloading of Grain Material from the Loading Hopper
Lecture Notes in Civil Engineering
Mottaeva, Angela (Herausgeber:in) / Saitov, Aleksey (Autor:in) / Kurbanov, Rustam (Autor:in) / Saitov, Viktor (Autor:in)
International Scientific Conference on Architecture and Construction ; 2020
24.12.2020
9 pages
Aufsatz/Kapitel (Buch)
Elektronische Ressource
Englisch
Taring the Unloading of Grain Material from the Loading Hopper
| TIBKAT | 2021
Engineering transport vehicle hopper facilitating loading and unloading
| Europäisches Patentamt | 2021
Further development of loading and unloading processes for hopper suction dredgers
| British Library Conference Proceedings | 1995