Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Numerical study on failure of laminated glass subjected to low-velocity impact
https://orcid.org/http://orcid.org/0000-0003-1686-6231
Laminated glass has been introduced to improve the mechanical performance, in particular impact resistance, of float glass while maintaining its transparency. However, its rate-dependent behaviour has not been sufficiently understood and various methods have been used to model it. This study compares the response of three material models commonly used to model glass cracking implemented in industry-standard LS-DYNA software: a smeared fixed crack model with the Rankine failure criterion, the nonlocal failure criterion by Pyttel et al. and the Johnson-Holmquist model. The input parameters are taken from several published studies, so each model was tested in multiple validated settings. The response of the models is compared with values measured during an earlier experimental campaign. The reference experiments involved freely hanging full-scale samples, which eliminated the effect of structural supports and allowed more accurate validation of the numerical models. The response of two types of glass, i.e. annealed or heat-strengthened, and two types of interlayer, i.e., polyvinyl butyral or ethylene–vinyl acetate, was tested and is simulated herein. The time evolution of the contact force, specimen accelerations, and fracture patterns are discussed, demonstrating the main shortcomings of the three models in simulating destructive tests on laminated glass samples under low-velocity impact.
Numerical study on failure of laminated glass subjected to low-velocity impact
https://orcid.org/http://orcid.org/0000-0003-1686-6231
Laminated glass has been introduced to improve the mechanical performance, in particular impact resistance, of float glass while maintaining its transparency. However, its rate-dependent behaviour has not been sufficiently understood and various methods have been used to model it. This study compares the response of three material models commonly used to model glass cracking implemented in industry-standard LS-DYNA software: a smeared fixed crack model with the Rankine failure criterion, the nonlocal failure criterion by Pyttel et al. and the Johnson-Holmquist model. The input parameters are taken from several published studies, so each model was tested in multiple validated settings. The response of the models is compared with values measured during an earlier experimental campaign. The reference experiments involved freely hanging full-scale samples, which eliminated the effect of structural supports and allowed more accurate validation of the numerical models. The response of two types of glass, i.e. annealed or heat-strengthened, and two types of interlayer, i.e., polyvinyl butyral or ethylene–vinyl acetate, was tested and is simulated herein. The time evolution of the contact force, specimen accelerations, and fracture patterns are discussed, demonstrating the main shortcomings of the three models in simulating destructive tests on laminated glass samples under low-velocity impact.
Numerical study on failure of laminated glass subjected to low-velocity impact
https://orcid.org/http://orcid.org/0000-0003-1686-6231
Laminated glass has been introduced to improve the mechanical performance, in particular impact resistance, of float glass while maintaining its transparency. However, its rate-dependent behaviour has not been sufficiently understood and various methods have been used to model it. This study compares the response of three material models commonly used to model glass cracking implemented in industry-standard LS-DYNA software: a smeared fixed crack model with the Rankine failure criterion, the nonlocal failure criterion by Pyttel et al. and the Johnson-Holmquist model. The input parameters are taken from several published studies, so each model was tested in multiple validated settings. The response of the models is compared with values measured during an earlier experimental campaign. The reference experiments involved freely hanging full-scale samples, which eliminated the effect of structural supports and allowed more accurate validation of the numerical models. The response of two types of glass, i.e. annealed or heat-strengthened, and two types of interlayer, i.e., polyvinyl butyral or ethylene–vinyl acetate, was tested and is simulated herein. The time evolution of the contact force, specimen accelerations, and fracture patterns are discussed, demonstrating the main shortcomings of the three models in simulating destructive tests on laminated glass samples under low-velocity impact.
Numerical study on failure of laminated glass subjected to low-velocity impact
Glass Struct Eng
Hála, Petr (Autor:in) / Zemanová, Alena (Autor:in) / Zeman, Jan (Autor:in) / Šejnoha, Michal (Autor:in)
Glass Structures & Engineering ; 8 ; 99-117
01.03.2023
19 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Ultimate Strength and Failure Process of Composite Laminated Plates Subjected to Low-Velocity Impact
| British Library Online Contents | 2003
Dynamic Response of Laminated Composites Subjected to Low-velocity Impact
| British Library Online Contents | 2007
Numerical analysis of impact failure of automotive laminated glass: A review
| British Library Online Contents | 2017
Numerical analysis of impact failure of automotive laminated glass: A review
| British Library Online Contents | 2017
Failure analysis of laminated architectural glass panels subjected to blast loading
| British Library Conference Proceedings | 2002