Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Validating a finite element model for rigid aircraft pavement load transfer against full scale testing
Rigid aircraft pavements are generally comprised of unreinforced concrete slabs constructed on a bound or granular sub-base layer, over the natural or constructed subgrade or fill. Important to any rigid aircraft pavement design and construction are the joints between the concrete slabs. The joints control shrinkage cracks during curing, allow for thermal expansion and contraction during temperature cycles, they isolate concrete slabs from structural penetrations and importantly, provide load transfer between adjacent slabs. Load transfer is commonly modelled using finite element methods; however, any new model should be validated against observed physical events. Recently, full-scale testing was performed at the Federal Aviation Authority National Airport Pavement Testing Facility as part of Construction Cycle 8 (CC8), which investigated load transfer characteristics for a range of joint types. The results from CC8 tests provide up-to-date stress and strain values to validate any new finite element model. This paper presents the development of a finite element model to predict load transfer of a doweled construction joint, and its validation against CC8 test results. The model showed good agreement with CC8 test results, and now that it is validated, will be used to investigate innovative joint solutions for rigid aircraft pavements.
Validating a finite element model for rigid aircraft pavement load transfer against full scale testing
Rigid aircraft pavements are generally comprised of unreinforced concrete slabs constructed on a bound or granular sub-base layer, over the natural or constructed subgrade or fill. Important to any rigid aircraft pavement design and construction are the joints between the concrete slabs. The joints control shrinkage cracks during curing, allow for thermal expansion and contraction during temperature cycles, they isolate concrete slabs from structural penetrations and importantly, provide load transfer between adjacent slabs. Load transfer is commonly modelled using finite element methods; however, any new model should be validated against observed physical events. Recently, full-scale testing was performed at the Federal Aviation Authority National Airport Pavement Testing Facility as part of Construction Cycle 8 (CC8), which investigated load transfer characteristics for a range of joint types. The results from CC8 tests provide up-to-date stress and strain values to validate any new finite element model. This paper presents the development of a finite element model to predict load transfer of a doweled construction joint, and its validation against CC8 test results. The model showed good agreement with CC8 test results, and now that it is validated, will be used to investigate innovative joint solutions for rigid aircraft pavements.
Validating a finite element model for rigid aircraft pavement load transfer against full scale testing
Jamieson, Sean (Autor:in) / White, Greg (Autor:in)
31.12.2024
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Analysis of Rigid Pavement Subjected to Aircraft Load Using Finite Element Technique
| DOAJ | 2023
A fully heterogeneous viscoelastic finite element model for full-scale accelerated pavement testing
| Online Contents | 2013
A fully heterogeneous viscoelastic finite element model for full-scale accelerated pavement testing
| British Library Online Contents | 2013
Load Transfer in Rigid Airport Pavement Joints
| British Library Conference Proceedings | 2000
Full-Scale Accelerated Pavement Testing of Texas Mobile Load Simulator
| Online Contents | 1998