Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Incorporation of a high volume of cenosphere particles in low water-to-cement matrix for developing high strength and lightweight cementitious composites
The incorporation of a high volume of lightweight aggregates generally results in a reduction of mechanical properties. To overcome this intrinsic problem, this study used a high volume of cenosphere particles (10–20 wt.% of cement) along with silica fume and quartz powder in a very dense microstructure. The reactivity of the cenospheres in the composites was investigated by X-ray diffraction and thermogravimetric analysis. Furthermore, microcomputed tomography was used to visualize the cenosphere particles in the designed cementitious composite for ensuring uniform distribution. The experiments showed that compressive strengths of 64–74 MPa and 87–90 MPa at 28 days of curing were achieved under ambient (20 °C) and high (90 °C) temperature, respectively. Furthermore, it exhibited significantly low density and thermal conductivity compared to other cementitious composites with cenospheres. Finally, the role of the cenospheres in the designed cementitious matrix was limited to inert filler, and no direct evidence of a chemical reaction was observed.
Incorporation of a high volume of cenosphere particles in low water-to-cement matrix for developing high strength and lightweight cementitious composites
The incorporation of a high volume of lightweight aggregates generally results in a reduction of mechanical properties. To overcome this intrinsic problem, this study used a high volume of cenosphere particles (10–20 wt.% of cement) along with silica fume and quartz powder in a very dense microstructure. The reactivity of the cenospheres in the composites was investigated by X-ray diffraction and thermogravimetric analysis. Furthermore, microcomputed tomography was used to visualize the cenosphere particles in the designed cementitious composite for ensuring uniform distribution. The experiments showed that compressive strengths of 64–74 MPa and 87–90 MPa at 28 days of curing were achieved under ambient (20 °C) and high (90 °C) temperature, respectively. Furthermore, it exhibited significantly low density and thermal conductivity compared to other cementitious composites with cenospheres. Finally, the role of the cenospheres in the designed cementitious matrix was limited to inert filler, and no direct evidence of a chemical reaction was observed.
Incorporation of a high volume of cenosphere particles in low water-to-cement matrix for developing high strength and lightweight cementitious composites
Mahato, Jyoti (Autor:in) / Yang, Jingwei (Autor:in) / Lee, Nankyoung (Autor:in) / Kang, Hyunuk (Autor:in) / Moon, Juhyuk (Autor:in)
Journal of Sustainable Cement-Based Materials ; 12 ; 580-591
04.05.2023
12 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Unbekannt
Mechanical Behavior of Thin-Laminated Cementitious Composites Incorporating Cenosphere Fillers
| British Library Online Contents | 2018
Utilization of fly ash cenosphere as lightweight filler in cement-based composites--a review
| Online Contents | 2017