Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Experimental and numerical analysis of inserts in sandwich structures
In aeronautics, sandwich structures are widely used for secondary structures like flaps or landing gear doors. In the case of landing gear doors, the junction is made by a local reinforcement called an insert. This insert is made by a resin molded in the Nomex(trademark) sandwich core. Such structures are still designed mainly using test results and the lack of an efficient numerical model remains a problem. The purpose of this study is on the one hand to perform experiments in order to be able to identify the failure modes and on the other hand to propose an efficient numerical model. Pull-out tests with cycling were conducted and 3D displacement measured by optical methods. The potential failure modes are numerous (delamination, local fiber breaking, skin/core debonding, core crushing, core shear buckling, potting failure, etc.). Experiments demonstrated that, for the lower loads, the non-linearity and the hysteresis are mainly due to core shear buckling. From this observation, the nonlinear behavior of the core is identified by a 3 point-bending test. The shear-modulus damage law is then implemented on a non-linear finite element model and an acceptable correlation of the tests is achieved. As a consequence, some improvements of the technology will be proposed, manufactured and tested.
Experimental and numerical analysis of inserts in sandwich structures
In aeronautics, sandwich structures are widely used for secondary structures like flaps or landing gear doors. In the case of landing gear doors, the junction is made by a local reinforcement called an insert. This insert is made by a resin molded in the Nomex(trademark) sandwich core. Such structures are still designed mainly using test results and the lack of an efficient numerical model remains a problem. The purpose of this study is on the one hand to perform experiments in order to be able to identify the failure modes and on the other hand to propose an efficient numerical model. Pull-out tests with cycling were conducted and 3D displacement measured by optical methods. The potential failure modes are numerous (delamination, local fiber breaking, skin/core debonding, core crushing, core shear buckling, potting failure, etc.). Experiments demonstrated that, for the lower loads, the non-linearity and the hysteresis are mainly due to core shear buckling. From this observation, the nonlinear behavior of the core is identified by a 3 point-bending test. The shear-modulus damage law is then implemented on a non-linear finite element model and an acceptable correlation of the tests is achieved. As a consequence, some improvements of the technology will be proposed, manufactured and tested.
Experimental and numerical analysis of inserts in sandwich structures
Bunyawanichakul, P. (Autor:in) / Castanie, B. (Autor:in) / Barrau, J.J. (Autor:in)
Applied Composite Materials ; 12 ; 177-191
2005
15 Seiten, 12 Quellen
Aufsatz (Zeitschrift)
Englisch
Sandwich Structures with Composite Inserts: Experimental Studies
| Springer Verlag | 2005
Sandwich structures with composite inserts: Experimental studies
| British Library Online Contents | 2009
Sandwich structures with composite inserts: Experimental studies
| British Library Conference Proceedings | 2005
Non-linear finite element analysis of inserts in composite sandwich structures
| British Library Online Contents | 2008
Partial Inserts in Sandwich Panels - Fatigue Tests
| British Library Conference Proceedings | 1998