Parameter effects on wet ultrafine grinding of limestone through slurry rheology in a stirred media mill: Fid-Bau Portal

Parameter effects on wet ultrafine grinding of limestone through slurry rheology in a stirred media mill

He, Mingzhao / Wang, Yanmin / Forssberg, Eric

Wet ultra-fine grinding of a limestone powder (< 100 my m) has been investigated in a stirred media mill with respect to the effect of slurry rheology. The grinding results obtained by various parameters (i.e., molecular weight of a dispersant, solids concentration, additive dosage, addition method and beads load) are evaluated in terms of energy efficiency and the fineness of a product. A polymeric dispersant called Dispersant S40 with a molecular weight of 5500 gives the best grinding results. For a certain level of beads load, an optimal solids concentration exists. In the case of the additive dosage of Dispersant S40 at 0.1 wt.% or more, a smaller additive amount of Dispersant S40 gives a higher energy efficiency and a smaller median size at a lower level of specific energy input. However, the excessive amount of the dispersant could cause a cushion layer formed on milling beads and thus lowers stress intensities from the collisions of milling beads, leading to an inefficient milling operation. This can be avoided by either the multi-point addition of the dispersant or a higher beads load (>= 83 vol.%). In addition, it was found that the higher the beads load, the better the cumulative energy efficiency, and the smaller the product size at the same specific energy consumption. For a given solids concentration, the relationships between the specific surface area and the particle size of an FP product and the additive amount of Dispersant S40 are explored, respectively. Furthermore, an empirical particle size-energy model provides a good fit (R² > 0.991) to the grinding results under the experimental conditions investigated.