Fatigue design of aluminium welded joints by the local stress concept with the fictitious notch radius of r<sub>f</sub>=1 mm: Fid-Bau Portal

Fachinformationsdienst BAUdigital

Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik

Fatigue design of aluminium welded joints by the local stress concept with the fictitious notch radius of r_f=1 mm

Morgenstern, C. / Sonsino, C.M. / Hobbacher, A. / Sorbo, F.

The investigations were carried out with three different types of MIG-welded joints of the two aluminium alloys AlMg4.5Mn (AW-5083) and AlMgSi1 T6 (AW-6082 T6) under fully reversed and pulsating axial loading. The evaluation of the results showed that the local stress concept using the fictitious notch radius of r_f=1.0 mm can be applied to aluminium welded joints from plates with thickness t >=5 mm independently from the alloy and weld geometries (fully or partially penetrated butt welds, transversal stiffener). Master design curves are proposed for different stress ratios, i.e. R=-1, 0 and 0.5, which allow the consideration of residual stresses as well as load induced mean stresses. The results permit also the suggestion of Delta sigma=70 MPa as FAT-value for the IIW-fatigue design recommendations.

Zugriff

Zugriff über TIB

Verfügbarkeit in meiner Bibliothek prüfen

Bestellung bei Subito €

Seitennavigation

Dokumentinformationen

Ähnliche Titel

Exportieren, teilen und zitieren

Fatigue design of aluminium welded joints by the local stress concept with the fictitious notch radius of r_f=1 mm

Morgenstern, C. / Sonsino, C.M. / Hobbacher, A. / Sorbo, F.

The investigations were carried out with three different types of MIG-welded joints of the two aluminium alloys AlMg4.5Mn (AW-5083) and AlMgSi1 T6 (AW-6082 T6) under fully reversed and pulsating axial loading. The evaluation of the results showed that the local stress concept using the fictitious notch radius of r_f=1.0 mm can be applied to aluminium welded joints from plates with thickness t >=5 mm independently from the alloy and weld geometries (fully or partially penetrated butt welds, transversal stiffener). Master design curves are proposed for different stress ratios, i.e. R=-1, 0 and 0.5, which allow the consideration of residual stresses as well as load induced mean stresses. The results permit also the suggestion of Delta sigma=70 MPa as FAT-value for the IIW-fatigue design recommendations.

Fatigue design of aluminium welded joints by the local stress concept with the fictitious notch radius of r_f=1 mm

Morgenstern, C. / Sonsino, C.M. / Hobbacher, A. / Sorbo, F.

The investigations were carried out with three different types of MIG-welded joints of the two aluminium alloys AlMg4.5Mn (AW-5083) and AlMgSi1 T6 (AW-6082 T6) under fully reversed and pulsating axial loading. The evaluation of the results showed that the local stress concept using the fictitious notch radius of r_f=1.0 mm can be applied to aluminium welded joints from plates with thickness t >=5 mm independently from the alloy and weld geometries (fully or partially penetrated butt welds, transversal stiffener). Master design curves are proposed for different stress ratios, i.e. R=-1, 0 and 0.5, which allow the consideration of residual stresses as well as load induced mean stresses. The results permit also the suggestion of Delta sigma=70 MPa as FAT-value for the IIW-fatigue design recommendations.

Zugriff

Zugriff über TIB

Verfügbarkeit in meiner Bibliothek prüfen

Bestellung bei Subito €

Seitennavigation

Dokumentinformationen

Ähnliche Titel

Exportieren, teilen und zitieren

Dokumentinformationen

Titel:

Fatigue design of aluminium welded joints by the local stress concept with the fictitious notch radius of r_f=1 mm

Beteiligte:

Morgenstern, C. (Autor:in) / Sonsino, C.M. (Autor:in) / Hobbacher, A. (Autor:in) / Sorbo, F. (Autor:in)

Erschienen in:

International Journal of Fatigue ; 28 ; 881-890

Erscheinungsdatum:

2006

Format / Umfang:

10 Seiten, 21 Quellen

ISSN:

DOI:

https://doi.org/10.1016/j.ijfatigue.2005.10.006

Medientyp:

Aufsatz (Zeitschrift)

Format:

Print

Sprache:

Englisch

Schlagwörter:

Materialermüdung , Aluminiumoxid , Stahl , Spannungsanalyse , Baustatik , Stumpfschweißen , Schweißverbindung , Aluminiummagnesiummanganlegierung , Aluminiummagnesiumsiliciumlegierung , Ermüdungswiderstand

Ähnliche Titel

Fatigue design of aluminium welded joints by the local stress concept with the fictitious notch radius of rf=1mm

Morgenstern, C. / Sonsino, C. M. / Hobbacher, A. et al. | British Library Online Contents | 2006

Fatigue Design of Welded Joints by Local Approaches: Comparison between Fictitious Notch Rounding and Strain Energy Averaging

Lazzarin, P. / Berto, F. / Radaj, D. | British Library Online Contents | 2007

Fatigue design of welded joints from the wrought magnesium alloy AZ31 by the local stress concept with the fictitious notch radii of rf=1.0 and 0.05mm

Karakas, O. / Morgenstern, C. / Sonsino, C. M. | British Library Online Contents | 2008

Assessment of multiaxial fatigue behaviour of welded joints under combined bending and torsion by application of a fictitious notch radius

Sonsino, C. M. / Lagoda, T. | British Library Online Contents | 2004

Fatigue predictions of welded joints and the effective notch stress concept

Schijve, J. | British Library Online Contents | 2012