Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Tool-path generation for sidewall machining
Presented in this paper is a tool-path generation procedure for sidewall machining, a process that is essential in the fabrication of many mechanical parts. While sculptured surface machining has received a significant amount of attention, there has been relatively less study of the technological requirements of sidewall machining. In this paper, three technological requirements are identified: (1) machining clean-up regions after rough machining, (2) avoiding unbalanced tool wear, and (3) retaining down-milling. For the generation of a roughing tool-path, the PWID offset algorithm is utilized. After roughing, it is necessary to identify the clean-up regions. Identifying these regions requires two major computations: a 2D-curve offsetting and a 2D-Booleaning operation. To avoid these heavy operations, this paper proposes a method that identifies clean-up regions by making use of the byproducts (interfering ranges) of the PWID offset algorithm. As a result, it is possible to identify clean-up regions efficiently with minimum effort.
Tool-path generation for sidewall machining
Presented in this paper is a tool-path generation procedure for sidewall machining, a process that is essential in the fabrication of many mechanical parts. While sculptured surface machining has received a significant amount of attention, there has been relatively less study of the technological requirements of sidewall machining. In this paper, three technological requirements are identified: (1) machining clean-up regions after rough machining, (2) avoiding unbalanced tool wear, and (3) retaining down-milling. For the generation of a roughing tool-path, the PWID offset algorithm is utilized. After roughing, it is necessary to identify the clean-up regions. Identifying these regions requires two major computations: a 2D-curve offsetting and a 2D-Booleaning operation. To avoid these heavy operations, this paper proposes a method that identifies clean-up regions by making use of the byproducts (interfering ranges) of the PWID offset algorithm. As a result, it is possible to identify clean-up regions efficiently with minimum effort.
Tool-path generation for sidewall machining
Chang, Minho (Autor:in) / Kim, Chong-Man (Autor:in) / Park, S.C. (Autor:in)
Computers and Industrial Engineering ; 56 ; 1649-1656
2009
8 Seiten, 17 Quellen
Aufsatz (Zeitschrift)
Englisch
Tool-path generation for NURBS surface machining
| Tema Archiv | 2003
Tool Path Planning and NC Generation of Tilted Plane Machining Features for Five-Axis Machining
| British Library Online Contents | 2012
Collision-Free Tool Path Generation for Five-Axis High Speed Machining
| British Library Online Contents | 2011
A New Architecture of Tool Path Generation for Five-Axis Control Machining
| British Library Online Contents | 2005
Five-axis Tool Path Generation for Sculptured Surface Machining using Rational Bezier Motions
| British Library Conference Proceedings | 2004