Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Corrosion Detection in Steel-Reinforced Concrete Using a Spectroscopic Technique
Detecting the early corrosion of steel that is embedded in reinforced concrete (rebar) is a goal that would greatly facilitate the inspection and measurement of corrosion in the US physical infrastructure. Since 2010, the National Institute of Standards and Technology (NIST) has been working on a large project to develop an electromagnetic (EM) probe that detects the specific corrosion products via spectroscopic means. Several principal iron corrosion products, such as hematite and goethite, are antiferromagnetic at field temperatures. At a given applied EM frequency, which depends on temperature, these compounds undergo a unique absorption resonance that identifies the presence of these particular iron corrosion products. The frequency of the resonances tends to be on the order of 100 GHz or higher, so transmitting EM waves through the cover concrete and back out again at a detectable level has been challenging. NIST has successfully detected these two iron corrosion products, and is developing equipment and methodologies that will be capable of penetrating the typical 50 mm of cover concrete in the field. The novel part of this project is the detection of specific compounds, rather than only geometrical changes in rebar cross-section. This method has the potential of providing an early-corrosion probe for steel in reinforced concrete, and for other applications where steel is covered by various layers and coatings.
Corrosion Detection in Steel-Reinforced Concrete Using a Spectroscopic Technique
Detecting the early corrosion of steel that is embedded in reinforced concrete (rebar) is a goal that would greatly facilitate the inspection and measurement of corrosion in the US physical infrastructure. Since 2010, the National Institute of Standards and Technology (NIST) has been working on a large project to develop an electromagnetic (EM) probe that detects the specific corrosion products via spectroscopic means. Several principal iron corrosion products, such as hematite and goethite, are antiferromagnetic at field temperatures. At a given applied EM frequency, which depends on temperature, these compounds undergo a unique absorption resonance that identifies the presence of these particular iron corrosion products. The frequency of the resonances tends to be on the order of 100 GHz or higher, so transmitting EM waves through the cover concrete and back out again at a detectable level has been challenging. NIST has successfully detected these two iron corrosion products, and is developing equipment and methodologies that will be capable of penetrating the typical 50 mm of cover concrete in the field. The novel part of this project is the detection of specific compounds, rather than only geometrical changes in rebar cross-section. This method has the potential of providing an early-corrosion probe for steel in reinforced concrete, and for other applications where steel is covered by various layers and coatings.
Corrosion Detection in Steel-Reinforced Concrete Using a Spectroscopic Technique
Garboczi, E.J. (Autor:in) / Stutzman, P.E. (Autor:in) / Wang, S. (Autor:in) / Martys, N.S. (Autor:in) / Hassan, A.M. (Autor:in) / Duthinh, D. (Autor:in) / Provenzano, V. (Autor:in) / Chou, S.G. (Autor:in) / Plusquellic, D.F. (Autor:in) / Surek, J.T. (Autor:in)
2013
4 Seiten, Bilder, 12 Quellen
Aufsatz (Konferenz)
Englisch
Detection of corrosion rate of steel in reinforced concrete
| Tema Archiv | 2002
Corrosion of steel-reinforced concrete poles
| Tema Archiv | 1989
Corrosion control of steel-reinforced concrete
| Tema Archiv | 2000
Corrosion of reinforced steel in concrete
| Tema Archiv | 1992