Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Flexural Behaviour of Reinforced Concrete Beam with Glass Fiber Reinforced Polymer (GFRP) Bar Strengthened with Carbon Fiber Reinforced Polymer (CFRP) Plate
The use of glass-fiber-reinforced polymer (GFRP) bar to replace steel reinforcement in concrete structures is a relatively a new technique. The GFRP bars possess mechanical properties different from steel bars, including high tensile strength combined with low elastic modulus and linear stress–strain relationship up to failure. Therefore, design procedures and process should account for these properties. This paper presents the experimental work on the flexural behavior of concrete beam reinforced with GFRP bars and strengthen with CFRP plate. A total of ten reinforced concrete beams reinforced with either steel and GFRP bars were cast and tested under four point loads. Eight concrete beams (200x250x2800mm) were reinforced with 13mm diameter GFRP bars together with strengthening using CFRP plate and two control beams reinforced with 12mm diameter steel bars were tested. The experimental results show that although the stiffness of the beams reduced but the ultimate load of the GFRP reinforced concrete beam is bigger than steel reinforced beam. It was also found that strengthening using CFRP plate will further enhanced the flexural performance of the beams with GFRP bars.
Flexural Behaviour of Reinforced Concrete Beam with Glass Fiber Reinforced Polymer (GFRP) Bar Strengthened with Carbon Fiber Reinforced Polymer (CFRP) Plate
The use of glass-fiber-reinforced polymer (GFRP) bar to replace steel reinforcement in concrete structures is a relatively a new technique. The GFRP bars possess mechanical properties different from steel bars, including high tensile strength combined with low elastic modulus and linear stress–strain relationship up to failure. Therefore, design procedures and process should account for these properties. This paper presents the experimental work on the flexural behavior of concrete beam reinforced with GFRP bars and strengthen with CFRP plate. A total of ten reinforced concrete beams reinforced with either steel and GFRP bars were cast and tested under four point loads. Eight concrete beams (200x250x2800mm) were reinforced with 13mm diameter GFRP bars together with strengthening using CFRP plate and two control beams reinforced with 12mm diameter steel bars were tested. The experimental results show that although the stiffness of the beams reduced but the ultimate load of the GFRP reinforced concrete beam is bigger than steel reinforced beam. It was also found that strengthening using CFRP plate will further enhanced the flexural performance of the beams with GFRP bars.
Flexural Behaviour of Reinforced Concrete Beam with Glass Fiber Reinforced Polymer (GFRP) Bar Strengthened with Carbon Fiber Reinforced Polymer (CFRP) Plate
Advanced Materials Research ; 1051 ; 748-751
27.10.2014
4 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Ductility of Carbon Fiber Reinforced Polymer (CFRP) Strengthened Concrete Flexural Members
British Library Conference Proceedings | 2002
|Compressive Behaviour of Glass Fiber-Reinforced Polymer (GFRP) Reinforced Concrete Columns
Springer Verlag | 2021
|SAGE Publications | 2021
|British Library Online Contents | 2002
|