Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Seismic performance and parametric study of precast reinforced concrete Shear Wall structure with indirect‐lapping joints
https://orcid.org/0000-0001-6353-7014
https://orcid.org/0000-0003-4227-5953
https://orcid.org/0000-0001-8738-4489
https://orcid.org/0000-0002-7265-5896
AbstractPrecast reinforced concrete (RC) shear wall structures (PRCSWS) are widely adopted by high‐rise buildings owing to their attractive advantages such as high construction quality and seismic resistance. A novel vertical joint for PRCSWS was proposed, featured by the indirect lap between connection cages and vertical distributed bars of the wall panel. The feasibility of this joint was verified by pseudo‐static experiments on precast shear wall specimens with different joint designs and a referential cast‐in‐place (CIP) specimen. To gain more insights into the failure mechanism of the PRCSWS with different joint designs, non‐linear finite element (FE) models were established and analyzed for the numerical study. The simulation showed good agreement with the experimental result regarding the load‐drift curves, cracking patterns, and failure modes, exhibiting a flexural‐shear failure with corner concrete crushing. The investigation into the failure patterns of four specimens indicated that anchorage deterioration of interfaces inside the joints was induced by cyclic tension, leading to both reductions in ductility and energy dissipation. This effect was more obvious when the connection cages (a design parameter) were less and more concentrated. The parametric study revealed that increasing the anchorage length of connection cage in wall panel and additional confinement reinforcements surrounding the reserved ducts could reduce the relative slip on the interfaces and enhance the anchorage of connection cages, which could further improve the seismic performance of PRCSWS.
Seismic performance and parametric study of precast reinforced concrete Shear Wall structure with indirect‐lapping joints
https://orcid.org/0000-0001-6353-7014
https://orcid.org/0000-0003-4227-5953
https://orcid.org/0000-0001-8738-4489
https://orcid.org/0000-0002-7265-5896
AbstractPrecast reinforced concrete (RC) shear wall structures (PRCSWS) are widely adopted by high‐rise buildings owing to their attractive advantages such as high construction quality and seismic resistance. A novel vertical joint for PRCSWS was proposed, featured by the indirect lap between connection cages and vertical distributed bars of the wall panel. The feasibility of this joint was verified by pseudo‐static experiments on precast shear wall specimens with different joint designs and a referential cast‐in‐place (CIP) specimen. To gain more insights into the failure mechanism of the PRCSWS with different joint designs, non‐linear finite element (FE) models were established and analyzed for the numerical study. The simulation showed good agreement with the experimental result regarding the load‐drift curves, cracking patterns, and failure modes, exhibiting a flexural‐shear failure with corner concrete crushing. The investigation into the failure patterns of four specimens indicated that anchorage deterioration of interfaces inside the joints was induced by cyclic tension, leading to both reductions in ductility and energy dissipation. This effect was more obvious when the connection cages (a design parameter) were less and more concentrated. The parametric study revealed that increasing the anchorage length of connection cage in wall panel and additional confinement reinforcements surrounding the reserved ducts could reduce the relative slip on the interfaces and enhance the anchorage of connection cages, which could further improve the seismic performance of PRCSWS.
Seismic performance and parametric study of precast reinforced concrete Shear Wall structure with indirect‐lapping joints
https://orcid.org/0000-0001-6353-7014
https://orcid.org/0000-0003-4227-5953
https://orcid.org/0000-0001-8738-4489
https://orcid.org/0000-0002-7265-5896
AbstractPrecast reinforced concrete (RC) shear wall structures (PRCSWS) are widely adopted by high‐rise buildings owing to their attractive advantages such as high construction quality and seismic resistance. A novel vertical joint for PRCSWS was proposed, featured by the indirect lap between connection cages and vertical distributed bars of the wall panel. The feasibility of this joint was verified by pseudo‐static experiments on precast shear wall specimens with different joint designs and a referential cast‐in‐place (CIP) specimen. To gain more insights into the failure mechanism of the PRCSWS with different joint designs, non‐linear finite element (FE) models were established and analyzed for the numerical study. The simulation showed good agreement with the experimental result regarding the load‐drift curves, cracking patterns, and failure modes, exhibiting a flexural‐shear failure with corner concrete crushing. The investigation into the failure patterns of four specimens indicated that anchorage deterioration of interfaces inside the joints was induced by cyclic tension, leading to both reductions in ductility and energy dissipation. This effect was more obvious when the connection cages (a design parameter) were less and more concentrated. The parametric study revealed that increasing the anchorage length of connection cage in wall panel and additional confinement reinforcements surrounding the reserved ducts could reduce the relative slip on the interfaces and enhance the anchorage of connection cages, which could further improve the seismic performance of PRCSWS.
Seismic performance and parametric study of precast reinforced concrete Shear Wall structure with indirect‐lapping joints
Structural Concrete
Wang, Qingmin (Autor:in) / Zhao, Weijian (Autor:in) / Li, Yongquan (Autor:in) / Yang, Yuanzhang (Autor:in)
Structural Concrete ; 25 ; 2053-2078
01.06.2024
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Seismic performance research on wall-slab joints of new precast concrete shear wall structure
| British Library Online Contents | 2011
Seismic Performance Assessment of Reinforced Concrete Building with Precast Shear Wall
| Springer Verlag | 2021
Seismic performance of half precast beams with lapping bar splices under shear forces
| British Library Conference Proceedings | 1996