Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
NaBH4 Geopolymer Composites
The handling of NaBH4 in a geopolymer type matrix is easy and can be done under open conditions. It is possible to store a high concentration of hydrogen, higher and easier compared to any related zeolite compound to which geopolymer gels could be seen as the mother compounds. From a systematic study of change in parameters, somehow optimized parameters for highest hydrogen release from NaBH4 geopolymer composite materials could be estimated: These are drying at 85 °C, a NaBH4/solid ratio of R = 0.75 and a molar Si/Al ratio of 2.6. A sample synthesized using these conditions releases 180 ml hydrogen per 100 mg. In comparison to the pure NaBH4 salt, it can be concluded that up to 80% hydrogen can be released by the reaction with diluted acid compared to pure NaBH4. An increase of more than 10% released hydrogen could be achieved with increasing the Si/Al ratio between 0.5 and 2.6. The new NaBH4‐geopolymer composite may offer interesting properties as an alternative to the familiar use of alkaline solution containing 30 wt% NaBH4 in fuel cell applications. Further investigation may show if suitable technical solutions could be available for a direct application with the new composite. A more general question may also be related to overcome the difficulties concerning the NaBH4 itself.
NaBH4 Geopolymer Composites
The handling of NaBH4 in a geopolymer type matrix is easy and can be done under open conditions. It is possible to store a high concentration of hydrogen, higher and easier compared to any related zeolite compound to which geopolymer gels could be seen as the mother compounds. From a systematic study of change in parameters, somehow optimized parameters for highest hydrogen release from NaBH4 geopolymer composite materials could be estimated: These are drying at 85 °C, a NaBH4/solid ratio of R = 0.75 and a molar Si/Al ratio of 2.6. A sample synthesized using these conditions releases 180 ml hydrogen per 100 mg. In comparison to the pure NaBH4 salt, it can be concluded that up to 80% hydrogen can be released by the reaction with diluted acid compared to pure NaBH4. An increase of more than 10% released hydrogen could be achieved with increasing the Si/Al ratio between 0.5 and 2.6. The new NaBH4‐geopolymer composite may offer interesting properties as an alternative to the familiar use of alkaline solution containing 30 wt% NaBH4 in fuel cell applications. Further investigation may show if suitable technical solutions could be available for a direct application with the new composite. A more general question may also be related to overcome the difficulties concerning the NaBH4 itself.
NaBH4 Geopolymer Composites
Kriven, Waltraud M. (Herausgeber:in) / Zhu, Dongming (Herausgeber:in) / Moon, Kyoung II (Herausgeber:in) / Hwang, Taejin (Herausgeber:in) / Wang, Jingyang (Herausgeber:in) / Lewinsohn, Charles (Herausgeber:in) / Zhou, Yanchun (Herausgeber:in) / Schomborg, Lars (Autor:in) / Rüscher, Claus H. (Autor:in) / Buhl, J. Christian (Autor:in)
19.12.2014
14 pages
Aufsatz/Kapitel (Buch)
Elektronische Ressource
Englisch
Fire Response of Geopolymer Structural Composites
| NTIS | 1996
Advances in multifunctional graphene-geopolymer composites
| Elsevier | 2020