Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Biosorption of Cadmium(II) Ions by Citrus Peels in a Packed Bed Column: Effect of Process Parameters and Comparison of Different Breakthrough Curve Models
The efficiency of low cost citrus peels as biosorbents for removal of cadmium ions from aqueous solution was investigated in a fixed bed column, a process that could be applied to treat industrial wastewaters similar to commonly used ion exchange columns. Effluent concentration versus time profiles (i.e., breakthrough curves) were experimentally determined in a laboratory‐scale packed bed column for varying operational parameters such as flow rate (2, 9, and 15.5 mL/min), influent cadmium concentration (5, 10, and 15 mg/L), and bed height (24, 48, and 72 cm) at pH 5.5. Column operation was most efficient for empty bed contact times of at least 10 min, which were apparently necessary for mass transfer. While the sorption capacity was largely unaffected by operational variables, the Thomas (Th) rate constant increased with the flow rate, and slightly decreased with increasing column length. Three widely used semi‐mechanistic models (Th, Bohart–Adams, and Yoon–Nelson) were shown to be equivalent and the generalized model was compared with a two‐parameter empirical model (dose‐response). The latter was found to be able to better simulate the breakthrough curve in the region of breakthrough and saturation.
Biosorption of Cadmium(II) Ions by Citrus Peels in a Packed Bed Column: Effect of Process Parameters and Comparison of Different Breakthrough Curve Models
The efficiency of low cost citrus peels as biosorbents for removal of cadmium ions from aqueous solution was investigated in a fixed bed column, a process that could be applied to treat industrial wastewaters similar to commonly used ion exchange columns. Effluent concentration versus time profiles (i.e., breakthrough curves) were experimentally determined in a laboratory‐scale packed bed column for varying operational parameters such as flow rate (2, 9, and 15.5 mL/min), influent cadmium concentration (5, 10, and 15 mg/L), and bed height (24, 48, and 72 cm) at pH 5.5. Column operation was most efficient for empty bed contact times of at least 10 min, which were apparently necessary for mass transfer. While the sorption capacity was largely unaffected by operational variables, the Thomas (Th) rate constant increased with the flow rate, and slightly decreased with increasing column length. Three widely used semi‐mechanistic models (Th, Bohart–Adams, and Yoon–Nelson) were shown to be equivalent and the generalized model was compared with a two‐parameter empirical model (dose‐response). The latter was found to be able to better simulate the breakthrough curve in the region of breakthrough and saturation.
Biosorption of Cadmium(II) Ions by Citrus Peels in a Packed Bed Column: Effect of Process Parameters and Comparison of Different Breakthrough Curve Models
Chatterjee, Abhijit (Autor:in) / Schiewer, Silke (Autor:in)
CLEAN – Soil, Air, Water ; 39 ; 874-881
01.09.2011
8 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Biosorption , Cadmium , Modeling , Citrus peels , Column
| DOAJ | 2022
An Estimation of Breakthrough Curve of Activated Carbon Adsorption Column
| British Library Online Contents | 2000
Biosorption of cadmium ions by Actinomycetes and separation by flotation
| Online Contents | 1999
Comparing yields from the extraction of different citrus peels and spray drying of the extracts
| British Library Online Contents | 2015