Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Advanced Treatment of Sodium Acetate in Water by Ozone Oxidation
Ozone oxidation is an advanced oxidation process for treatment of organic and inorganic wastewater. In this paper, sodium acetate (according to chemical oxygen demand [COD]) was selected as the model pollutant in water, and the degradation efficiencies and mechanism of sodium acetate in water by ozone oxidation were investigated. The results showed that the ozone oxidation was an effective treatment technology for advanced treatment of sodium acetate in water; the COD removal rate obtained the maximum value of 45.89% from sodium acetate solution when the pH value was 10.82, ozone concentration was 100 mg/L, reaction time was 30 minutes, and reaction temperature was 25 °C. The COD removal rate increased first and decreased subsequently with the bicarbonate () concentration from 0 to 200 mg/L, the largest decline being 20.35%. The COD removal rate declined by 25.38% with the carbonate (CO32−) concentration from 0 to 200 mg/L; CO32− has a more obvious scavenging effect to inhibit the formation of hydroxyl free radicals than. Calcium chloride (CaCl2) and calcium hydroxide (Ca(OH)2) could enhance the COD removal rate greatly; they could reach 77.35 and 96.53%, respectively, after a reaction time of 30 minutes, which was increased by 31.46 and 50.64%, respectively, compared with only ozone oxidation. It was proved that the main ozone oxidation product of sodium acetate was carbon dioxide (CO2), and the degradation of sodium acetate in the ozone oxidation process followed the mechanism of hydroxyl free radicals.
Advanced Treatment of Sodium Acetate in Water by Ozone Oxidation
Ozone oxidation is an advanced oxidation process for treatment of organic and inorganic wastewater. In this paper, sodium acetate (according to chemical oxygen demand [COD]) was selected as the model pollutant in water, and the degradation efficiencies and mechanism of sodium acetate in water by ozone oxidation were investigated. The results showed that the ozone oxidation was an effective treatment technology for advanced treatment of sodium acetate in water; the COD removal rate obtained the maximum value of 45.89% from sodium acetate solution when the pH value was 10.82, ozone concentration was 100 mg/L, reaction time was 30 minutes, and reaction temperature was 25 °C. The COD removal rate increased first and decreased subsequently with the bicarbonate () concentration from 0 to 200 mg/L, the largest decline being 20.35%. The COD removal rate declined by 25.38% with the carbonate (CO32−) concentration from 0 to 200 mg/L; CO32− has a more obvious scavenging effect to inhibit the formation of hydroxyl free radicals than. Calcium chloride (CaCl2) and calcium hydroxide (Ca(OH)2) could enhance the COD removal rate greatly; they could reach 77.35 and 96.53%, respectively, after a reaction time of 30 minutes, which was increased by 31.46 and 50.64%, respectively, compared with only ozone oxidation. It was proved that the main ozone oxidation product of sodium acetate was carbon dioxide (CO2), and the degradation of sodium acetate in the ozone oxidation process followed the mechanism of hydroxyl free radicals.
Advanced Treatment of Sodium Acetate in Water by Ozone Oxidation
Yang, De‐min (Autor:in) / Yuan, Jian‐mei (Autor:in)
Water Environment Research ; 86 ; 141-146
01.02.2014
6 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Advanced Treatment - Melbourne Water upgrades with ozone treatment
Online Contents | 2011
| DOAJ | 2023
Innovation - Advanced water treatment system using ozone and ozone-resistant microfiltration module
| Online Contents | 2001
Degradation of drugs in water with advanced oxidation processes and ozone
| Online Contents | 2014
An ozone-hydrogen peroxide-microwave-enhanced advanced oxidation process for sewage sludge treatment
| Online Contents | 2007