Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Effect of Operating Parameters on the Performance of a Thiobacillus thioparus‐Immobilized Polyurethane Foam Biotrickling Filter for Hydrogen Sulfide Removal
The effect of variation in the two important process parameters of liquid recirculation rate (LRR) and empty bed residence time (EBRT), on the elimination capacity (EC), and removal efficiency (RE) of H2S from a synthetic waste gas stream in a biotrickling filter (BTF) was studied using Box‐Behnken design of experiment. The BTF employed contained Thiobacillus thioparus immobilized on polyurethane foam. The results showed that both the effect of LRR and EBRT on RE and EC depended on the concentration of H2S in the inlet gas stream (Cin). At the lower side of the range 1.85–5.55 m/h, increase in LRR always resulted in an increase in both RE and EC; however, over the higher side of this range, at high Cin, increasing LRR did not have a marked effect on RE and EC whereas at low Cin it actually lead to a slight reduction in the value of both parameters. Also, increasing EBRT exacerbated the observed negative effect of high LRR on RE. Contour plot analysis revealed that at low Cin acceptable RE can be achieved simply by reducing EBRT to sufficiently low values independent of the value of LRR. However, at higher Cin the correct setting of the level of both operating parameters is necessary in order to ensure a sufficiently high RE.
Effect of Operating Parameters on the Performance of a Thiobacillus thioparus‐Immobilized Polyurethane Foam Biotrickling Filter for Hydrogen Sulfide Removal
The effect of variation in the two important process parameters of liquid recirculation rate (LRR) and empty bed residence time (EBRT), on the elimination capacity (EC), and removal efficiency (RE) of H2S from a synthetic waste gas stream in a biotrickling filter (BTF) was studied using Box‐Behnken design of experiment. The BTF employed contained Thiobacillus thioparus immobilized on polyurethane foam. The results showed that both the effect of LRR and EBRT on RE and EC depended on the concentration of H2S in the inlet gas stream (Cin). At the lower side of the range 1.85–5.55 m/h, increase in LRR always resulted in an increase in both RE and EC; however, over the higher side of this range, at high Cin, increasing LRR did not have a marked effect on RE and EC whereas at low Cin it actually lead to a slight reduction in the value of both parameters. Also, increasing EBRT exacerbated the observed negative effect of high LRR on RE. Contour plot analysis revealed that at low Cin acceptable RE can be achieved simply by reducing EBRT to sufficiently low values independent of the value of LRR. However, at higher Cin the correct setting of the level of both operating parameters is necessary in order to ensure a sufficiently high RE.
Effect of Operating Parameters on the Performance of a Thiobacillus thioparus‐Immobilized Polyurethane Foam Biotrickling Filter for Hydrogen Sulfide Removal
Abdehagh, Niloofar (Autor:in) / Namini, Masoud T. (Autor:in) / Bonakdarpour, Babak (Autor:in) / Heydarian, Seyed Mohammad (Autor:in)
CLEAN – Soil, Air, Water ; 42 ; 1311-1317
01.09.2014
7 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Removal of Hydrogen Sulfide from POTW Air Streams Using Biotrickling Filters
British Library Conference Proceedings | 1996
|Taylor & Francis Verlag | 2001
|A Comparative Study of Biofilter and Biotrickling Filter Performance for Isopentane Removal
British Library Conference Proceedings | 1994
|A Comparative Study of Biofilter and Biotrickling Filter Performance for Isopentane Removal
British Library Conference Proceedings | 1994
|Vinyl chloride removal from an air stream by biotrickling filter
Taylor & Francis Verlag | 2012
|