Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Modelling shear–flexure interaction in equivalent frame models of slender reinforced concrete walls
Quasi‐static cyclic tests on reinforced concrete (RC) walls have shown that shear deformations can constitute a significant ratio of the total deformations when the wall is loaded beyond the elastic regime. For slender RC walls that form a stable flexural mechanism, the ratio of shear to flexural deformations remains approximately constant over the entire range of imposed displacement ductilities. This paper proposes a method for incorporating shear‐flexure interaction effects in equivalent frame models of slender RC walls by coupling the shear force‐shear strain relationship to the curvature and axial strain in the member. The suggested methodology is incorporated in a finite element consisting of two interacting spread inelasticity sub‐elements representing flexural and shear response, respectively. The element is implemented in the general finite element code IDARC and validated against experimental results of RC cantilever walls. In a second step, it is applied in inelastic static and dynamic analyses of tall wall and wall‐frame systems. It is shown that ignoring shear‐flexure interaction may lead to erroneous predictions in particular of local ductility and storey drift demands. Copyright © 2013 John Wiley & Sons, Ltd.
Modelling shear–flexure interaction in equivalent frame models of slender reinforced concrete walls
Quasi‐static cyclic tests on reinforced concrete (RC) walls have shown that shear deformations can constitute a significant ratio of the total deformations when the wall is loaded beyond the elastic regime. For slender RC walls that form a stable flexural mechanism, the ratio of shear to flexural deformations remains approximately constant over the entire range of imposed displacement ductilities. This paper proposes a method for incorporating shear‐flexure interaction effects in equivalent frame models of slender RC walls by coupling the shear force‐shear strain relationship to the curvature and axial strain in the member. The suggested methodology is incorporated in a finite element consisting of two interacting spread inelasticity sub‐elements representing flexural and shear response, respectively. The element is implemented in the general finite element code IDARC and validated against experimental results of RC cantilever walls. In a second step, it is applied in inelastic static and dynamic analyses of tall wall and wall‐frame systems. It is shown that ignoring shear‐flexure interaction may lead to erroneous predictions in particular of local ductility and storey drift demands. Copyright © 2013 John Wiley & Sons, Ltd.
Modelling shear–flexure interaction in equivalent frame models of slender reinforced concrete walls
Mergos, P. E. (Autor:in) / Beyer, K. (Autor:in)
The Structural Design of Tall and Special Buildings ; 23 ; 1171-1189
25.10.2014
19 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Numerical Modelling of Reinforced Concrete Slender Walls Subjected to Coupled Axial Tension–Flexure
| DOAJ | 2021
Numerical Modelling of Reinforced Concrete Slender Walls Subjected to Coupled Axial Tension–Flexure
| Springer Verlag | 2021
Efficient beam-based model for reinforced concrete walls considering shear-flexure interaction
| BASE | 2024