Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Laboratory tests of steel simple torsionally unbalanced models
10.1002/eqe.659.abs
The objective of this work is to obtain estimations of the amplification factors α and δ used for torsion design of buildings, from experiments. For this study, simple one‐storey torsionally unbalanced (TU) steel models were considered. Models consisted of a deck supported on four columns with a selected arrangement of hinges at column ends. Two theoretical structural eccentricities (e = 0.05 and 0.15) were considered. Models were excited with a simple long‐period pendulum consisting of a hanging platform with a forced‐vibration generator on it. Eight models were tested at several excitation levels (frequencies and force magnitudes) in both ranges of behaviour: elastic and inelastic. Experiments were conducted at three frequency ratios of excitation. Registered accelerations of the pendulum platform indicate that the experimental set‐up leads to excitations that resemble narrow‐band seismic ground motions. Frame shear force estimations, based on accelerations recorded at both deck sides, indicate that torsion design factors (α and δ) depend on eccentricity. Estimations of frame shears based on measurements indicate that for normalized eccentricities e ⩾ 0.025, the amplification α can be between 2 and 3; while δ factor resulted between 0.0 and 1.6. Copyright © 2006 John Wiley & Sons, Ltd.
Laboratory tests of steel simple torsionally unbalanced models
10.1002/eqe.659.abs
The objective of this work is to obtain estimations of the amplification factors α and δ used for torsion design of buildings, from experiments. For this study, simple one‐storey torsionally unbalanced (TU) steel models were considered. Models consisted of a deck supported on four columns with a selected arrangement of hinges at column ends. Two theoretical structural eccentricities (e = 0.05 and 0.15) were considered. Models were excited with a simple long‐period pendulum consisting of a hanging platform with a forced‐vibration generator on it. Eight models were tested at several excitation levels (frequencies and force magnitudes) in both ranges of behaviour: elastic and inelastic. Experiments were conducted at three frequency ratios of excitation. Registered accelerations of the pendulum platform indicate that the experimental set‐up leads to excitations that resemble narrow‐band seismic ground motions. Frame shear force estimations, based on accelerations recorded at both deck sides, indicate that torsion design factors (α and δ) depend on eccentricity. Estimations of frame shears based on measurements indicate that for normalized eccentricities e ⩾ 0.025, the amplification α can be between 2 and 3; while δ factor resulted between 0.0 and 1.6. Copyright © 2006 John Wiley & Sons, Ltd.
Laboratory tests of steel simple torsionally unbalanced models
De‐la‐Colina, Jaime (Autor:in) / Acuña, Qutberto (Autor:in) / Hernández, Alejandro (Autor:in) / Valdés, Jesús (Autor:in)
Earthquake Engineering & Structural Dynamics ; 36 ; 887-907
01.06.2007
21 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Laboratory tests of steel simple torsionally unbalanced models
| Online Contents | 2007
Seismic Displacements of Torsionally Unbalanced Buildings
| Online Contents | 1995
Seismic response of torsionally unbalanced buildings
| Engineering Index Backfile | 1967
Pseudodynamic response of torsionally unbalanced two-storey test structure
| Online Contents | 2007