Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Eine Plattform für die Wissenschaft: Bauingenieurwesen, Architektur und Urbanistik
Flexural and cracking behavior of corroded RC continuous beams strengthened with energized C‐FRCM system
This paper presents an experimental investigation into the flexural and cracking behavior of corroded reinforced concrete continuous beams with 11‐month wet–dry cycles strengthened by anodic polarized carbon‐fabric‐reinforced cementitious matrix (C‐FRCM) plates. The failure modes and flexural bearing capacities were discussed. The influences of the layer of carbon fabric mesh and complete carbon fiber‐reinforced polymer (CFRP) wrapping as end anchorage on the strengthening effectiveness were explored. The complete crack development patterns were captured by a digital image correlation system, and the results showed that the C‐FRCM system can provide satisfactory crack width control, as proved by the reduced crack spacing and the maximum crack width. The flexural capacities of the strengthened beams were effectively enhanced and the debonding failure can be eliminated through complete CFRP wrappings. Moreover, the design recommendations were proposed based on the estimation of the crack development as per related design guidelines.
Flexural and cracking behavior of corroded RC continuous beams strengthened with energized C‐FRCM system
This paper presents an experimental investigation into the flexural and cracking behavior of corroded reinforced concrete continuous beams with 11‐month wet–dry cycles strengthened by anodic polarized carbon‐fabric‐reinforced cementitious matrix (C‐FRCM) plates. The failure modes and flexural bearing capacities were discussed. The influences of the layer of carbon fabric mesh and complete carbon fiber‐reinforced polymer (CFRP) wrapping as end anchorage on the strengthening effectiveness were explored. The complete crack development patterns were captured by a digital image correlation system, and the results showed that the C‐FRCM system can provide satisfactory crack width control, as proved by the reduced crack spacing and the maximum crack width. The flexural capacities of the strengthened beams were effectively enhanced and the debonding failure can be eliminated through complete CFRP wrappings. Moreover, the design recommendations were proposed based on the estimation of the crack development as per related design guidelines.
Flexural and cracking behavior of corroded RC continuous beams strengthened with energized C‐FRCM system
Feng, Ran (Autor:in) / Tang, Jing‐Pu (Autor:in) / Liu, Panpan (Autor:in) / Wang, Fangying (Autor:in) / Zeng, Jun‐Jie (Autor:in) / Zhu, Ji‐Hua (Autor:in)
Structural Concrete ; 25 ; 659-676
01.02.2024
18 pages
Aufsatz (Zeitschrift)
Elektronische Ressource
Englisch
Flexural behavior of RC beams strengthened with steel-FRCM composite
| Online Contents | 2016
Fatigue Behavior of FRCM-Strengthened RC Beams
| ASCE | 2020
Flexural Behavior of Corroded RC Beams Strengthened by Textile-Reinforced Concrete
| DOAJ | 2023