A platform for research: civil engineering, architecture and urbanism
A platform for research: civil engineering, architecture and urbanism
Polyethersulfone–Quaternary Graphene Oxide–Sulfonated Polyethersulfone as a High-Performance Forward Osmosis Membrane Support Layer
https://orcid.org/0000-0003-0730-0412
The stability and compatibility of a nanomaterial in a substrate matrix are a tough challenge in preparing thin-film nanocomposite membranes. In this study, we fabricated a ternary nanocomposite membrane substrate consisting of polyethersulfone (PES), quaternary graphene oxide (QGO), and sulfonated polyethersulfone (SPES). First, SPES was blended with the PES substrate, and then different concentrations of QGO were incorporated within this substrate. The effect of QGO on the substrate morphology, hydrophilicity, and porosity was analyzed via scanning electron microscopy, water contact angle measurement, and gravimetric methods, respectively. The optimum loading of QGO significantly enhanced the hydrophilicity, porosity, and water permeability of the PES/SPES support layer. In addition, the effect of QGO on the polyamide rejection layer morphology and performance was thoroughly investigated. The result shows that a thin, smooth, and defect-free polyamide (PA) layer was formed on hydrophilic QGO-based substrates. Intrinsic separation performance data verified these results, where the PA layer formed on the QGO-based substrate presented the highest water permeability. The forward osmosis test also demonstrated the positive impact of QGO incorporation on the performance of membrane substrates. The optimal TFC-QS0.5 (containing 0.5 wt % of QGO) membrane has a water flux of 24.4 LMH in the forward osmosis mode and 32.1 LMH in the pressure-retarded osmosis mode when using a 1 M NaCl draw solution and deionized water feed solution.
This study provides a new avenue for the rational development of high-performance forward osmosis membranes for water and wastewater treatment.
Polyethersulfone–Quaternary Graphene Oxide–Sulfonated Polyethersulfone as a High-Performance Forward Osmosis Membrane Support Layer
https://orcid.org/0000-0003-0730-0412
The stability and compatibility of a nanomaterial in a substrate matrix are a tough challenge in preparing thin-film nanocomposite membranes. In this study, we fabricated a ternary nanocomposite membrane substrate consisting of polyethersulfone (PES), quaternary graphene oxide (QGO), and sulfonated polyethersulfone (SPES). First, SPES was blended with the PES substrate, and then different concentrations of QGO were incorporated within this substrate. The effect of QGO on the substrate morphology, hydrophilicity, and porosity was analyzed via scanning electron microscopy, water contact angle measurement, and gravimetric methods, respectively. The optimum loading of QGO significantly enhanced the hydrophilicity, porosity, and water permeability of the PES/SPES support layer. In addition, the effect of QGO on the polyamide rejection layer morphology and performance was thoroughly investigated. The result shows that a thin, smooth, and defect-free polyamide (PA) layer was formed on hydrophilic QGO-based substrates. Intrinsic separation performance data verified these results, where the PA layer formed on the QGO-based substrate presented the highest water permeability. The forward osmosis test also demonstrated the positive impact of QGO incorporation on the performance of membrane substrates. The optimal TFC-QS0.5 (containing 0.5 wt % of QGO) membrane has a water flux of 24.4 LMH in the forward osmosis mode and 32.1 LMH in the pressure-retarded osmosis mode when using a 1 M NaCl draw solution and deionized water feed solution.
This study provides a new avenue for the rational development of high-performance forward osmosis membranes for water and wastewater treatment.
Polyethersulfone–Quaternary Graphene Oxide–Sulfonated Polyethersulfone as a High-Performance Forward Osmosis Membrane Support Layer
https://orcid.org/0000-0003-0730-0412
The stability and compatibility of a nanomaterial in a substrate matrix are a tough challenge in preparing thin-film nanocomposite membranes. In this study, we fabricated a ternary nanocomposite membrane substrate consisting of polyethersulfone (PES), quaternary graphene oxide (QGO), and sulfonated polyethersulfone (SPES). First, SPES was blended with the PES substrate, and then different concentrations of QGO were incorporated within this substrate. The effect of QGO on the substrate morphology, hydrophilicity, and porosity was analyzed via scanning electron microscopy, water contact angle measurement, and gravimetric methods, respectively. The optimum loading of QGO significantly enhanced the hydrophilicity, porosity, and water permeability of the PES/SPES support layer. In addition, the effect of QGO on the polyamide rejection layer morphology and performance was thoroughly investigated. The result shows that a thin, smooth, and defect-free polyamide (PA) layer was formed on hydrophilic QGO-based substrates. Intrinsic separation performance data verified these results, where the PA layer formed on the QGO-based substrate presented the highest water permeability. The forward osmosis test also demonstrated the positive impact of QGO incorporation on the performance of membrane substrates. The optimal TFC-QS0.5 (containing 0.5 wt % of QGO) membrane has a water flux of 24.4 LMH in the forward osmosis mode and 32.1 LMH in the pressure-retarded osmosis mode when using a 1 M NaCl draw solution and deionized water feed solution.
This study provides a new avenue for the rational development of high-performance forward osmosis membranes for water and wastewater treatment.
Polyethersulfone–Quaternary Graphene Oxide–Sulfonated Polyethersulfone as a High-Performance Forward Osmosis Membrane Support Layer
Salehi, Hasan (author) / Shakeri, Alireza (author) / Razavi, Seyed Reza (author)
ACS ES&T Water ; 2 ; 508-517
2022-04-08
Article (Journal)
Electronic Resource
English
| British Library Online Contents | 2010
Effects of special nanoparticles on fuel cell properties of sulfonated polyethersulfone membrane
| British Library Online Contents | 2016
Effects of special nanoparticles on fuel cell properties of sulfonated polyethersulfone membrane
| British Library Online Contents | 2016
Polyethersulfone: High-Temperature Performer
British Library Online Contents | 1995
Preparation and performance of polyethersulfone hollow-fiber membrane
| British Library Online Contents | 2012