A platform for research: civil engineering, architecture and urbanism
A platform for research: civil engineering, architecture and urbanism
Removal of copper ions from dilute sulfuric acid solutions: Effect of solution composition and applied potential
Removal of copper from synthesized and real dilute sulfuric acid solutions was investigated. Effects of copper, iron concentrations and applied potential were studied. In pure copper solutions, increasing the Cu2+ concentration from 1000 to 5000 mg.L-1 increased the copper recovery from about 30-300% depending on the cathode potential and decreased the energy consumption by about 30%. Also, with increasing the acid concentration from 15 to 50 g.L-1 an about 25% increase in copper recovery and a 30% decrease in energy consumption were observed. The addition of Fe2+ to the solution improved the ionic conductivity and so that the copper recovery. The specified energy consumption for the real leaching solutions increased to 31-47 KWh.kg-1. The diffusion coefficients for several synthesized and real copper electrowinning electrolytes were determined. Moreover, the maximum value of the diffusion coefficient (D) was obtained 2.27*10-4 cm2.s-1 for the pure copper solution at a concentration of 1000 mg.L-1 Cu2+ which was higher than impure and real solutions.
Removal of copper ions from dilute sulfuric acid solutions: Effect of solution composition and applied potential
Removal of copper from synthesized and real dilute sulfuric acid solutions was investigated. Effects of copper, iron concentrations and applied potential were studied. In pure copper solutions, increasing the Cu2+ concentration from 1000 to 5000 mg.L-1 increased the copper recovery from about 30-300% depending on the cathode potential and decreased the energy consumption by about 30%. Also, with increasing the acid concentration from 15 to 50 g.L-1 an about 25% increase in copper recovery and a 30% decrease in energy consumption were observed. The addition of Fe2+ to the solution improved the ionic conductivity and so that the copper recovery. The specified energy consumption for the real leaching solutions increased to 31-47 KWh.kg-1. The diffusion coefficients for several synthesized and real copper electrowinning electrolytes were determined. Moreover, the maximum value of the diffusion coefficient (D) was obtained 2.27*10-4 cm2.s-1 for the pure copper solution at a concentration of 1000 mg.L-1 Cu2+ which was higher than impure and real solutions.
Removal of copper ions from dilute sulfuric acid solutions: Effect of solution composition and applied potential
Saeed Hassani Sadrabadi (author) / Hojat Naderi (author) / Hamid Reza Zare (author) / Seyed Mohammad Moshtaghioun (author)
2022
Article (Journal)
Electronic Resource
Unknown
Metadata by DOAJ is licensed under CC BY-SA 1.0
Electrooxidation of Cr3+ ions in sulfuric acid solutions
| British Library Online Contents | 2007
Tribocorrosion behavior of Ti3SiC2 in the dilute and concentrated sulfuric acid solutions
| British Library Online Contents | 2010
Effect of Fluoride Ions on Chromium Deposition from Sulfuric Acid Solutions of Cr(III)
| British Library Online Contents | 1999
Corrosion Inhibition of Mild Steel in Dilute Sulfuric Acid Solution by Novel Triazole Compound
| British Library Online Contents | 2009
Method for comprehensively utilizing dilute sulfuric acid-containing wastewater
| European Patent Office | 2020