A platform for research: civil engineering, architecture and urbanism
A platform for research: civil engineering, architecture and urbanism
Microstructure and hydro-mechanical behaviour of compacted granular bentonite
In recent years, granular bentonite GB has become a reference material since it facilitates the backfilling operation due to high-density compacted granules with extended grain size distribution(maximum sizes around 10 mm). This investigation explores the initial microstructure of MX80-type GB and the hydro-mechanical HM response observed at the phenomenological scale. Samples were statically compacted at a fixed dry density (1.55 Mg/m3 ), encompassing dry and wet sides of the optimum. Themicrostructural study was performed using a combination of X-ray micro-computed tomography and mercury intrusion porosimetry. The results indicate that the pore size density function of compacted GB can be simplified as a double-porosity network with micropores (intra-granular/aggregate pores) and macropores(inter-granular/aggregate pores). Compacting at the dry side increases macropores, making the sample more compressible on loading under as-compacted states despite the higher matric suction. The time evolution of the swelling pressure displays a double-peak pattern attributed to the particular microstructure of the samples. Moreover, the initial microstructure does not significantly influence the water retention properties without a marked hysteresis in the high-suction range under confined wetting/drying cycles. This work’s outcomes highlight the microstructure’s significance in the HM behaviour of compacted GB and provide further insight into the geotechnical properties of this material.
Microstructure and hydro-mechanical behaviour of compacted granular bentonite
In recent years, granular bentonite GB has become a reference material since it facilitates the backfilling operation due to high-density compacted granules with extended grain size distribution(maximum sizes around 10 mm). This investigation explores the initial microstructure of MX80-type GB and the hydro-mechanical HM response observed at the phenomenological scale. Samples were statically compacted at a fixed dry density (1.55 Mg/m3 ), encompassing dry and wet sides of the optimum. Themicrostructural study was performed using a combination of X-ray micro-computed tomography and mercury intrusion porosimetry. The results indicate that the pore size density function of compacted GB can be simplified as a double-porosity network with micropores (intra-granular/aggregate pores) and macropores(inter-granular/aggregate pores). Compacting at the dry side increases macropores, making the sample more compressible on loading under as-compacted states despite the higher matric suction. The time evolution of the swelling pressure displays a double-peak pattern attributed to the particular microstructure of the samples. Moreover, the initial microstructure does not significantly influence the water retention properties without a marked hysteresis in the high-suction range under confined wetting/drying cycles. This work’s outcomes highlight the microstructure’s significance in the HM behaviour of compacted GB and provide further insight into the geotechnical properties of this material.
Microstructure and hydro-mechanical behaviour of compacted granular bentonite
Zeng Hao (author) / Gonzalez-Blanco Laura (author) / Romero Enrique (author) / Fraccica Alessandro (author)
2023
Article (Journal)
Electronic Resource
Unknown
Metadata by DOAJ is licensed under CC BY-SA 1.0
Thermo-Hydro-Mechanical Behaviour of Compacted Bentonite
| Springer Verlag | 2007
Comparative study of hydro-mechanical behaviors of compacted bentonite powder and granular bentonite
| Elsevier | 2024
Hydro-Mechanical Small-Scale Tests on Compacted Bentonite
| British Library Conference Proceedings | 2006