Mechanical Properties of Spruce Wood Extracted from GLT Beams Loaded by Fire: Fid-Bau Portal

Mechanical Properties of Spruce Wood Extracted from GLT Beams Loaded by Fire

Lucie Kucíková / Michal Šejnoha / Tomáš Janda / Jan Sýkora / Pavel Padevět / Guido Marseglia

Heating wood to high temperature changes either temporarily or permanently its physical properties. This issue is addressed in the present contribution by examining the effect of high temperature on residual mechanical properties of spruce wood, grounding on the results of full-scale fire tests performed on GLT beams. Given these tests, a computational model was developed to provide through-thickness temperature profiles allowing for the estimation of a charring depth on the one hand and on the other hand assigning a particular temperature to each specimen used subsequently in small-scale tensile tests. The measured Young’s moduli and tensile strengths were accompanied by the results from three-point bending test carried out on two groups of beams exposed to fire of a variable duration and differing in the width of the cross-section, $b = 100$ mm (Group 1) and $b = 160$ mm (Group 2). As expected, increasing the fire duration and reducing the initial beam cross-section reduces the residual bending strength. A negative impact of high temperature on residual strength has also been observed from simple tensile tests, although limited to a very narrow layer adjacent to the charring front not even exceeding a typically adopted value of the zero-strength layer $d_{0} = 7$ mm. On the contrary, the impact on stiffness is relatively mild supporting the thermal recovery property of wood.