A platform for research: civil engineering, architecture and urbanism
A platform for research: civil engineering, architecture and urbanism
Assessment of the 3D geometrical effects on the DEMO divertor pumping efficiency
In the present work, a parametric analysis by using the DIVGAS code is performed in order to highlight the influence of the inter-cassette gaps and the existence of the dome on the overall pumping efficiency of the DEMO divertor. For this fundamental study, a 3D divertor configuration is chosen, in which deuterium neutral particles are assumed to penetrate the private flux region. The chosen incoming boundary conditions correspond to high-collisionality divertor operational conditions. It has been found that in the case for a divertor without a dome the particle losses through the separatrix are dominating and consequently the effect of 3D leakages on the pumping efficiency is small. For the reference case of 20 mm gap width with the dome and low capture coefficients, the pumping efficiency is 9 times higher than for the case without the dome. In general, the existence of dome results in the elimination of the outflux of neutrals towards the x-point and forces the neutrals to move towards the sub-divertor vicinity, finally achieving a neutral compression. It is shown that the dome provides a first order variation in pumping efficiency in comparison to the case of the divertor without the dome, while the gap leakages provide a second order variation, which seems to be more important when the dome is present. Keywords: DEMO reactor, Divertor, Fueling, Pumping efficiency, DSMC method, Neutral modelling
Assessment of the 3D geometrical effects on the DEMO divertor pumping efficiency
In the present work, a parametric analysis by using the DIVGAS code is performed in order to highlight the influence of the inter-cassette gaps and the existence of the dome on the overall pumping efficiency of the DEMO divertor. For this fundamental study, a 3D divertor configuration is chosen, in which deuterium neutral particles are assumed to penetrate the private flux region. The chosen incoming boundary conditions correspond to high-collisionality divertor operational conditions. It has been found that in the case for a divertor without a dome the particle losses through the separatrix are dominating and consequently the effect of 3D leakages on the pumping efficiency is small. For the reference case of 20 mm gap width with the dome and low capture coefficients, the pumping efficiency is 9 times higher than for the case without the dome. In general, the existence of dome results in the elimination of the outflux of neutrals towards the x-point and forces the neutrals to move towards the sub-divertor vicinity, finally achieving a neutral compression. It is shown that the dome provides a first order variation in pumping efficiency in comparison to the case of the divertor without the dome, while the gap leakages provide a second order variation, which seems to be more important when the dome is present. Keywords: DEMO reactor, Divertor, Fueling, Pumping efficiency, DSMC method, Neutral modelling
Assessment of the 3D geometrical effects on the DEMO divertor pumping efficiency
S. Varoutis (author) / Yu. Igitkhanov (author) / Chr. Day (author)
2019
Article (Journal)
Electronic Resource
Unknown
Metadata by DOAJ is licensed under CC BY-SA 1.0
Preliminary analysis of the efficiency of non-standard divertor configurations in DEMO
| DOAJ | 2017
European DEMO divertor target: Operational requirements and material-design interface
| DOAJ | 2016
Parametric scaling of power exhaust in EU-DEMO alternative divertor simulations
| DOAJ | 2023
Recent progress of plasma exhaust concepts and divertor designs for tokamak DEMO reactors
| DOAJ | 2023