Properties of rubberized concretes containing silica fume: Fid-Bau Portal

Properties of rubberized concretes containing silica fume

Güneyisi, Erhan / Gesoğlu, Mehmet / Özturan, Turan

AbstractA test program was carried out to develop information about the mechanical properties of rubberized concretes with and without silica fume. Two types of tire rubber, crumb rubber and tire chips, were used as fine and coarse aggregate, respectively, in the production of rubberized concrete mixtures which were obtained by partially replacing the aggregate with rubber. Six designated rubber contents varying from 2.5% to 50% by total aggregate volume were used. The concretes with silica fume were produced by partial substitution of cement with silica fume at varying amounts of 5–20%. Totally, 70 concrete mixtures were cast and tested for compressive and splitting tensile strengths, and static modulus of elasticity in accordance to ASTM standards. The design strength level ranging from 54 to 86 MPa was achieved using water–cementitious material (w/cm) ratios of 0.60 and 0.40. Test results indicated that there was a large reduction in the strength and modulus values with the increase in rubber content. However, the addition of silica fume into the matrix improved the mechanical properties of the rubberized concretes and diminished the rate of strength loss. Results also revealed that a rubber content of as high as 25% by total aggregate volume might be practically used to produce rubberized concretes with compressive strength of 16–32 MPa.