Fatigue strength of notched specimens made of 40CrMoV13.9 under multiaxial loading: Fid-Bau Portal

Fatigue strength of notched specimens made of 40CrMoV13.9 under multiaxial loading

Berto, F. / Lazzarin, P. / Marangon, C.

Graphical abstract Display Omitted

Highlights • Multiaxial fatigue behaviour of 40CrMoV13.9 is investigated. • 120 New fatigue data are summarised in the paper. • Notches with different acuities are considered. • The influence of the phase angle is investigated. • A criterion based on local energy has been used to summarise the data in a single scatterband.

Abstract The work deals with multiaxial fatigue strength of notched round bars made of 40CrMoV13.9 steel and tested under combined tension and torsion loading, both in-phase and out-of-phase. The axis-symmetric V-notches present a constant notch root radius, 1mm, and a notch opening angle of 90°; the notch root radius is equal to 4mm in the semi-circular notches where the strength in the high cycle fatigue regime is usually controlled by the theoretical stress concentration factor, being the notch root radius large enough to result in a notch sensitivity index equals to unity. In both geometries the diameter of the net transverse area is 12mm. The results from multi-axial tests are discussed together with those obtained under pure tension and pure torsion loading from notched specimens with the same geometry. Altogether more than 120 new fatigue data are summarised in the present work, corresponding to a one-year of testing programme. All fatigue data are presented first in terms of nominal stress amplitudes referred to the net area and then re-analysed in terms of the mean value of the strain energy density evaluated over a given, crescent shape volume embracing the stress concentration region. For the specific steel, the radius of the control volume is found to be independent of the loading mode.