A platform for research: civil engineering, architecture and urbanism
A platform for research: civil engineering, architecture and urbanism
Deflection of unbonded partially prestressed concrete continuous beams
https://orcid.org/0000-0002-2163-3531
Highlights Simplified moment of inertia of cracked sections for unbonded partially prestressed concrete continuous beams is obtained. It gives satisfactory predictions of deflection till the yielding of non-prestressed steel. Proposed method is easy to apply to the design of such members.
Abstract Continuous beams are preferred to simply supported beams because of economy, fewer expansion/contraction joints and possible benefits from moment redistribution. In the design of unbonded partially prestressed concrete (UPPC) continuous beams, it is necessary to estimate their deflections under service loads in order to satisfy the requirements of serviceability limit state. A method is developed to convert the cross sectional area of unbonded prestressed tendons to the equivalent cross sectional area of non-prestressed steel. Then the moment of inertia of cracked section as well as Branson’s effective moment of inertia in a UPPC continuous beam can be easily determined. The computed deflections are compared with some available experimental results, including beams with external unbonded steel tendons and those with external unbonded aramid fibre reinforced polymer tendons. The proposed method gives satisfactory predictions of deflection till the yielding of non-prestressed steel. Another equation for moment of inertia of cracked section, which was originally suggested by the precast/prestressed concrete institute (PCI) Design Handbook for bonded partially prestressed concrete beams, is also evaluated in the study. In most cases the PCI equation can also give satisfactory results but in some cases its discrepancy of deflections is larger than that of the proposed method. Compared with the method recommended in the current Chinese Code, the proposed method is applicable not only to members with the conventional high-strength steel prestressing tendons, but also to those with tendons made of other materials such as fibre-reinforced polymer.
Deflection of unbonded partially prestressed concrete continuous beams
https://orcid.org/0000-0002-2163-3531
Highlights Simplified moment of inertia of cracked sections for unbonded partially prestressed concrete continuous beams is obtained. It gives satisfactory predictions of deflection till the yielding of non-prestressed steel. Proposed method is easy to apply to the design of such members.
Abstract Continuous beams are preferred to simply supported beams because of economy, fewer expansion/contraction joints and possible benefits from moment redistribution. In the design of unbonded partially prestressed concrete (UPPC) continuous beams, it is necessary to estimate their deflections under service loads in order to satisfy the requirements of serviceability limit state. A method is developed to convert the cross sectional area of unbonded prestressed tendons to the equivalent cross sectional area of non-prestressed steel. Then the moment of inertia of cracked section as well as Branson’s effective moment of inertia in a UPPC continuous beam can be easily determined. The computed deflections are compared with some available experimental results, including beams with external unbonded steel tendons and those with external unbonded aramid fibre reinforced polymer tendons. The proposed method gives satisfactory predictions of deflection till the yielding of non-prestressed steel. Another equation for moment of inertia of cracked section, which was originally suggested by the precast/prestressed concrete institute (PCI) Design Handbook for bonded partially prestressed concrete beams, is also evaluated in the study. In most cases the PCI equation can also give satisfactory results but in some cases its discrepancy of deflections is larger than that of the proposed method. Compared with the method recommended in the current Chinese Code, the proposed method is applicable not only to members with the conventional high-strength steel prestressing tendons, but also to those with tendons made of other materials such as fibre-reinforced polymer.
Deflection of unbonded partially prestressed concrete continuous beams
https://orcid.org/0000-0002-2163-3531
Highlights Simplified moment of inertia of cracked sections for unbonded partially prestressed concrete continuous beams is obtained. It gives satisfactory predictions of deflection till the yielding of non-prestressed steel. Proposed method is easy to apply to the design of such members.
Abstract Continuous beams are preferred to simply supported beams because of economy, fewer expansion/contraction joints and possible benefits from moment redistribution. In the design of unbonded partially prestressed concrete (UPPC) continuous beams, it is necessary to estimate their deflections under service loads in order to satisfy the requirements of serviceability limit state. A method is developed to convert the cross sectional area of unbonded prestressed tendons to the equivalent cross sectional area of non-prestressed steel. Then the moment of inertia of cracked section as well as Branson’s effective moment of inertia in a UPPC continuous beam can be easily determined. The computed deflections are compared with some available experimental results, including beams with external unbonded steel tendons and those with external unbonded aramid fibre reinforced polymer tendons. The proposed method gives satisfactory predictions of deflection till the yielding of non-prestressed steel. Another equation for moment of inertia of cracked section, which was originally suggested by the precast/prestressed concrete institute (PCI) Design Handbook for bonded partially prestressed concrete beams, is also evaluated in the study. In most cases the PCI equation can also give satisfactory results but in some cases its discrepancy of deflections is larger than that of the proposed method. Compared with the method recommended in the current Chinese Code, the proposed method is applicable not only to members with the conventional high-strength steel prestressing tendons, but also to those with tendons made of other materials such as fibre-reinforced polymer.
Deflection of unbonded partially prestressed concrete continuous beams
Du, J.S. (author) / Au, Francis T.K. (author) / Chan, Enoch K.H. (author) / Liu, L. (author)
Engineering Structures ; 118 ; 89-96
2016-03-16
8 pages
Article (Journal)
Electronic Resource
English
Deflection of unbonded partially prestressed concrete continuous beams
| Online Contents | 2016
Tendon Stress in Unbonded Partially Prestressed Concrete Beams
| Springer Verlag | 1991
Tendon Stress in Unbonded Partially Prestressed Continuous Concrete Members
| British Library Conference Proceedings | 1996
Unbonded Post-Tensioning Tendons and Partially Prestressed Beams
| Online Contents | 1994
Deflection Prediction and Cracking of Beams Prestressed with Unbonded Tendons
| British Library Conference Proceedings | 2005