Geomembrane puncture and strains from stones in an underlying clay layer: Fid-Bau Portal

Geomembrane puncture and strains from stones in an underlying clay layer

Brachman, R.W.I. / Sabir, A.

AbstractResults from physical experiments are presented to assess the possible puncture of a 1.5-mm-thick HDPE geomembrane and, if not punctured, the maximum tensile strains in the deformed geomembrane from intentionally placed stone particles in an underlying compacted clay liner when subjected to applied vertical stresses. The influences of applied pressure, clay water content, stone size, stone burial depth and protection layer on the geomembrane tensile strains are reported. Except in one test conducted to a pressure of 2000kPa, the geomembrane was not punctured in the short-term tests conducted; however, it was subjected to local indentations and tensile strains from the underlying gravel particles that may exceed proposed allowable long-term strain limits. Tensile strains for the specific 35mm stones tested when initially flush with the clay surface were negligible, even up to pressures of 1000kPa, provided the initial water content of clay was 12%. Increases in water content or stone size were found to increase the tensile strain. Placing the clay at the lower limit of acceptable water content was found to be beneficial in terms of reducing strains from buried stones; however, this was also found to make the geomembrane more susceptible to stone particles sitting on top of the clay surface and hence careful site inspection is required to remove all visible stones that sit on top of the clay surface.