Processing of AISI M2 high speed steel reinforced with vanadium carbide by solar sintering: Fid-Bau Portal

Processing of AISI M2 high speed steel reinforced with vanadium carbide by solar sintering

Herranz, G. / Romero, A. / de Castro, V. / Rodríguez, G.P.

Highlights • This work presents a novel process for successful sintering of MMC using solar energy. • Sintering of reinforced M2 was successful using both a Fresnel lens and a solar furnace. • This process allows applying lower sintering temperatures and much shorter times. • The nanometer sized particles would explain the high hardness values obtained.

Abstract This investigation addresses sintering of AISI M2 high speed steel reinforced with vanadium carbide (VC) using concentrated solar energy (CSE). CSE allows significant reduction of processing times due to its enhanced activating effect and high heating rates achieved. The M2 steel powders were reinforced with 3, 6 and 10wt% VC and sintered under a N2–5%H2 atmosphere at two solar installations: a Fresnel lens (FL) and a solar furnace (SF). The microstructures of the solar-sintered samples were studied and compared with other samples sintered using a conventional tubular furnace. Results show that the use of solar installations significantly reduces optimal sintering temperatures in more than 200°C. Furthermore, the use of CSE allows a dramatic reduction of the treatment times from cycles longer than 10h in tubular furnace (TF) to cycles of 15min in solar furnace. Finally, the addition of VC increases hardness in most of the studied cases but in the samples processed in the solar installation the increase is higher achieving 987HV in the sample reinforced with 10wt% of VC without any additional thermal treatment. The microstructural analysis together with X-ray diffraction characterization allows explaining these results.