A platform for research: civil engineering, architecture and urbanism
A platform for research: civil engineering, architecture and urbanism
Enhanced electrokinetic remediation of contaminated manufactured gas plant soil
AbstractThis paper evaluates different flushing agents to enhance the efficiency of electrokinetic remediation of a manufactured gas plant (MGP) soil contaminated with polycyclic aromatic hydrocarbons (PAHs) and heavy metals. Because of high concentrations, PAHs were of environmental concern and required to be removed to acceptable levels. Four flushing agents, which included two surfactants (3% Tween 80, and 5% Igepal CA-720), one cosolvent (20% n-Butylamine) and one cyclodextrin (10% hydroxypropyl-β-cyclodextrin or HPCD), were examined to enhance the solubilization of PAHs in the soil. Four electrokinetic experiments were conducted at 2.0 VDC/cm voltage gradient and 1.4 hydraulic gradient in order to assess the effectiveness of these flushing solutions for the removal of PAHs. Variables measured during the application of electric potential were electric current, electroosmotic flow, and contaminant removal from the soil. After the completion of each test, the soil was further examined for moisture content, pH, redox potential, electrical conductivity, and residual contaminant distribution. It is found that cosolvent increased the soil pH, while the surfactants and HPCD did not induce substantial change in the soil pH. The current densities fluctuated with time for all tests and remained less than 1 mA/cm2. The current density for the test conducted with cosolvent was higher as compared to the tests conducted with surfactants and HPCD. Electroosmotic flow was the maximum with the cosolvent, while the lowest flow was observed with Tween 80 surfactant. Overall, Igepal CA-720 surfactant yielded the highest removal efficiency due to partial solubilization of PAHs, causing some PAHs to migrate towards the cathode. Heavy metals are found to be strongly adsorbed/ precipitated and showed negligible migration behavior in all the tests. Based on the contaminant mass remaining in the soil, it is apparent that further optimization of the electrokinetic system is required to improve PAH removal efficiency for the MGP soil.
Enhanced electrokinetic remediation of contaminated manufactured gas plant soil
AbstractThis paper evaluates different flushing agents to enhance the efficiency of electrokinetic remediation of a manufactured gas plant (MGP) soil contaminated with polycyclic aromatic hydrocarbons (PAHs) and heavy metals. Because of high concentrations, PAHs were of environmental concern and required to be removed to acceptable levels. Four flushing agents, which included two surfactants (3% Tween 80, and 5% Igepal CA-720), one cosolvent (20% n-Butylamine) and one cyclodextrin (10% hydroxypropyl-β-cyclodextrin or HPCD), were examined to enhance the solubilization of PAHs in the soil. Four electrokinetic experiments were conducted at 2.0 VDC/cm voltage gradient and 1.4 hydraulic gradient in order to assess the effectiveness of these flushing solutions for the removal of PAHs. Variables measured during the application of electric potential were electric current, electroosmotic flow, and contaminant removal from the soil. After the completion of each test, the soil was further examined for moisture content, pH, redox potential, electrical conductivity, and residual contaminant distribution. It is found that cosolvent increased the soil pH, while the surfactants and HPCD did not induce substantial change in the soil pH. The current densities fluctuated with time for all tests and remained less than 1 mA/cm2. The current density for the test conducted with cosolvent was higher as compared to the tests conducted with surfactants and HPCD. Electroosmotic flow was the maximum with the cosolvent, while the lowest flow was observed with Tween 80 surfactant. Overall, Igepal CA-720 surfactant yielded the highest removal efficiency due to partial solubilization of PAHs, causing some PAHs to migrate towards the cathode. Heavy metals are found to be strongly adsorbed/ precipitated and showed negligible migration behavior in all the tests. Based on the contaminant mass remaining in the soil, it is apparent that further optimization of the electrokinetic system is required to improve PAH removal efficiency for the MGP soil.
Enhanced electrokinetic remediation of contaminated manufactured gas plant soil
Reddy, Krishna R. (author) / Ala, Prasanth R. (author) / Sharma, Saurabh (author) / Kumar, Surendra N. (author)
Engineering Geology ; 85 ; 132-146
2005-09-15
15 pages
Article (Journal)
Electronic Resource
English
Enhanced electrokinetic remediation of contaminated manufactured gas plant soil
| British Library Conference Proceedings | 2006
Enhanced electrokinetic remediation of contaminated manufactured gas plant soil
| British Library Online Contents | 2006
Enhanced Electrokinetic Remediation of Soil Contaminated with Heavy Metals
| British Library Conference Proceedings | 2008
Electrokinetic remediation of mercury contaminated soil
| British Library Online Contents | 2004