Search

Gas-phase filters breakthrough models at low concentration – Effect of relative humidity

Khazraei Vizhemehr, Ali / Haghighat, Fariborz / Lee, Chang-Seo

Abstract Indoor air quality (IAQ) is a major concern in non-industrial buildings since it influences occupants' health, comfort and productivity. Adsorption-based granular activated carbon (GAC) filters are commonly being used to purify indoor air by removing indoor air pollutants. Predicting the breakthrough time of filters is necessary for scheduling their maintenance and/or regeneration. However, the pollutants' concentrations that typically encounter in indoor environment are very low thus increasing the influence of humidity on the filter performance. Also, the existing standard recommends the test to be carried out at 100 ppm, which is much higher than the actual volatile organic compounds (VOC) concentration in buildings. This paper reports the development of a framework for predicting the breakthrough curve of activated carbon filters at low concentration and different levels of relative humidity applying accelerated test data. The procedure is based on two well-known empirical models: Wheeler–Jonas and Yoon–Nelson equations. The overall mass transfer coefficient in the Wheeler–Jonas equation and the proportionality constant in the Yoon–Nelson equation (both as a function of adsorption capacity) are a function of humidity level. Results show that the proposed framework allows the breakthrough time at humid condition and low contaminant concentration to be estimated using the data obtained from the existing standard test procedure.

Highlights • Review the effect of RH on theoretical breakthrough models' parameters. • Investigate the physical interpretation of each criterion. • Develop a procedure to estimate the breakthrough time of gas-phase filters at humid conditions. • Validate the developed framework for a wide range of concentration and RH levels.