Stability of beams in steel eccentrically braced frames: Fid-Bau Portal

Stability of beams in steel eccentrically braced frames

Yiğitsoy, Gül / Topkaya, Cem / Okazaki, Taichiro

Abstract When an eccentrically braced frame (EBF) is subjected to a severe seismic event, large axial force and bending moments are produced in the beam outside of the link. Designers face significant difficulties in meeting the capacity design requirement to keep these beams elastic. On the other hand, previous research suggests that controlled yielding in the beams is not detrimental to EBF performance as long as stability of the beam is maintained. A computational study was undertaken to investigate the stability of cyclically loaded EBFs. A total of 51 EBF sub-assemblage models, none of which satisfies the capacity design requirement, were selected and investigated through three-dimensional, nonlinear finite element analysis. The results indicate that the link overstrength factor should be a function of the link length for performing capacity design of the beam outside of the link. This is because flexure yielding links, which are more problematic to beam stability, tend to develop smaller overstrength compared to shear yielding links. Furthermore, designs with demand-to-capacity ratios greater than unity were found to be viable provided that the stability of the beam is maintained by making use of a slenderness limit developed herein.

Highlights • Stability of beams in EBFs is studied through numerical analysis. • Results indicate that the overstrength factor used in design can safely be relaxed. • An overstrength criterion based on normalized link length should be developed. • The beam depth-to-width ratio should be kept below 1.8 for satisfactory performance. • A slenderness limit is developed to prevent lateral torsional buckling.