A platform for research: civil engineering, architecture and urbanism
A platform for research: civil engineering, architecture and urbanism
Analysis of process parameters effects on friction stir welding of dissimilar aluminum alloy to advanced high strength steel
https://orcid.org/0000-0003-0296-3065
https://orcid.org/0000-0002-7965-9582
Highlights Successfully applied FSW for butt joining Al6061 to TRIP 780/800 steel. Process parameters effects on Al–Fe interface based on temperature and welding force. Weld nugget characterization. Al–Fe interface and joint quality.
Abstract Thin sheets of aluminum alloy 6061-T6 and one type of Advanced high strength steel, transformation induced plasticity (TRIP) steel have been successfully butt joined using friction stir welding (FSW) technique. The maximum ultimate tensile strength can reach 85% of the base aluminum alloy. Intermetallic compound (IMC) layer of FeAl or Fe3Al with thickness of less than 1μm was formed at the Al–Fe interface in the advancing side, which can actually contribute to the joint strength. Tensile tests and scanning electron microscopy (SEM) results indicate that the weld nugget can be considered as aluminum matrix composite, which is enhanced by dispersed sheared-off steel fragments encompassed by a thin intermetallic layer or simply intermetallic particles. Effects of process parameters on the joint microstructure evolution were analyzed based on mechanical welding force and temperature that have been measured during the welding process.
Analysis of process parameters effects on friction stir welding of dissimilar aluminum alloy to advanced high strength steel
https://orcid.org/0000-0003-0296-3065
https://orcid.org/0000-0002-7965-9582
Highlights Successfully applied FSW for butt joining Al6061 to TRIP 780/800 steel. Process parameters effects on Al–Fe interface based on temperature and welding force. Weld nugget characterization. Al–Fe interface and joint quality.
Abstract Thin sheets of aluminum alloy 6061-T6 and one type of Advanced high strength steel, transformation induced plasticity (TRIP) steel have been successfully butt joined using friction stir welding (FSW) technique. The maximum ultimate tensile strength can reach 85% of the base aluminum alloy. Intermetallic compound (IMC) layer of FeAl or Fe3Al with thickness of less than 1μm was formed at the Al–Fe interface in the advancing side, which can actually contribute to the joint strength. Tensile tests and scanning electron microscopy (SEM) results indicate that the weld nugget can be considered as aluminum matrix composite, which is enhanced by dispersed sheared-off steel fragments encompassed by a thin intermetallic layer or simply intermetallic particles. Effects of process parameters on the joint microstructure evolution were analyzed based on mechanical welding force and temperature that have been measured during the welding process.
Analysis of process parameters effects on friction stir welding of dissimilar aluminum alloy to advanced high strength steel
https://orcid.org/0000-0003-0296-3065
https://orcid.org/0000-0002-7965-9582
Highlights Successfully applied FSW for butt joining Al6061 to TRIP 780/800 steel. Process parameters effects on Al–Fe interface based on temperature and welding force. Weld nugget characterization. Al–Fe interface and joint quality.
Abstract Thin sheets of aluminum alloy 6061-T6 and one type of Advanced high strength steel, transformation induced plasticity (TRIP) steel have been successfully butt joined using friction stir welding (FSW) technique. The maximum ultimate tensile strength can reach 85% of the base aluminum alloy. Intermetallic compound (IMC) layer of FeAl or Fe3Al with thickness of less than 1μm was formed at the Al–Fe interface in the advancing side, which can actually contribute to the joint strength. Tensile tests and scanning electron microscopy (SEM) results indicate that the weld nugget can be considered as aluminum matrix composite, which is enhanced by dispersed sheared-off steel fragments encompassed by a thin intermetallic layer or simply intermetallic particles. Effects of process parameters on the joint microstructure evolution were analyzed based on mechanical welding force and temperature that have been measured during the welding process.
Analysis of process parameters effects on friction stir welding of dissimilar aluminum alloy to advanced high strength steel
Liu, Xun (author) / Lan, Shuhuai (author) / Ni, Jun (author)
2014-02-01
13 pages
Article (Journal)
Electronic Resource
English
| British Library Online Contents | 2014
Optimization of friction stir welding parameters for dissimilar aluminum alloys
| British Library Online Contents | 2010
| British Library Online Contents | 2014
Dissimilar friction stir welding between polycarbonate and AA 7075 aluminum alloy
| British Library Online Contents | 2015