Influence of recycled aggregates on properties of self-consolidating concretes: Fid-Bau Portal

Influence of recycled aggregates on properties of self-consolidating concretes

Señas, Lilia / Priano, Carla / Marfil, Silvina

Highlights•It is feasible to incorporate crushed concrete powder in order to achieve maximum use of the recycled concrete.•The influence of admixtures must be studied not only in fresh mixtures but also in hardened concrete.•Petrographic studies revealed that the incorporation of crushed concrete powder makes the mortar matrix denser.

AbstractRecycled aggregates are made from crushed waste concretes and can be used as a replacement of natural aggregates in concrete production. Despite having lower density and higher absorption than natural aggregates, they can be used to manufacture conventional concretes with good performance if they are added in the proper amounts. To make self-consolidating concretes, the same aggregates used to manufacture conventional concretes can be used, but in order to increase segregation resistance and keep mix cohesion, a large amount of fine aggregates and a suitable admixture are required. The main goal of this work is to study the influence of recycled aggregates on self-consolidating concrete. Concretes were mixed with 50% of the coarse aggregate replaced by recycled aggregates (Patagonia gravel) and with 20% of the fine aggregate (natural sand) replaced by crushed concrete powders. Fresh concrete properties were tested, and physical and mechanical properties were determined in the hardened state. The petrographic composition of the concrete was examined to assess the interfacial transition zone and the contribution of the powders to the mortar microtexture. The results vary depending on the type of admixture and aggregate. However, it is shown that the inclusion of these crushed aggregates to make good self-consolidating concrete is feasible.