A platform for research: civil engineering, architecture and urbanism
A platform for research: civil engineering, architecture and urbanism
Flexural strengthening of RC beams using aluminum alloy plates with mechanically-fastened anchorage systems: An experimental investigation
Highlights Expansion Anchor Bolts (EAB) were used to fasten Aluminum Alloy (AA) plates to strengthen RC beams. EAB size, spacing and layout were used as varying parameters. All specimens exhibited more than 30% increase in their flexural strength. All specimens exhibited significant increase in ductility upto 84%. Use of hybrid combination of EAB and epoxy-bonding showed the best performance.
Abstract Externally bonded reinforcement (EBR) has emerged as one of the promising techniques for flexural strengthening of reinforced concrete (RC) members due to its practicality and structural effectiveness. However, shortcomings like premature failure modes, cost, labor, and installation time limited its use. Mechanically fastened (MF) Aluminum Alloy (AA) plates instead have the potential to overcome some of these drawbacks by providing strength and ductility, while influencing the failure modes. In this investigation, 16 RC beams were prepared, one beam was left un-strengthened (CB), one was strengthened with an externally bonded (EB) AA plate (CBE), and the remaining 14 beams were strengthened with MF AA plates that varied based on expansion anchor bolts (EAB) sizes, spacing, layout, and the presence or absence of epoxy. The test results indicated that all the specimens with MF AA plates exhibited approximately 30% increase in strength accompanied with drastic increase in ductility up to about 84% compared to specimen CBE. Analytical predictions were made to numerically assess the advantages of using MF systems where ACI 318-19 outperformed ACI 440.2R-17 due to the sufficient composite behavior that allows the AA plates to behave similar to steel reinforcement such that the section has an additional lever arm. It is concluded that the implementation of epoxy and EAB as an alternative anchorage technique serves as a viable approach in enhancing the strength and ductility of RC beams strengthened with AA plates.
Flexural strengthening of RC beams using aluminum alloy plates with mechanically-fastened anchorage systems: An experimental investigation
Highlights Expansion Anchor Bolts (EAB) were used to fasten Aluminum Alloy (AA) plates to strengthen RC beams. EAB size, spacing and layout were used as varying parameters. All specimens exhibited more than 30% increase in their flexural strength. All specimens exhibited significant increase in ductility upto 84%. Use of hybrid combination of EAB and epoxy-bonding showed the best performance.
Abstract Externally bonded reinforcement (EBR) has emerged as one of the promising techniques for flexural strengthening of reinforced concrete (RC) members due to its practicality and structural effectiveness. However, shortcomings like premature failure modes, cost, labor, and installation time limited its use. Mechanically fastened (MF) Aluminum Alloy (AA) plates instead have the potential to overcome some of these drawbacks by providing strength and ductility, while influencing the failure modes. In this investigation, 16 RC beams were prepared, one beam was left un-strengthened (CB), one was strengthened with an externally bonded (EB) AA plate (CBE), and the remaining 14 beams were strengthened with MF AA plates that varied based on expansion anchor bolts (EAB) sizes, spacing, layout, and the presence or absence of epoxy. The test results indicated that all the specimens with MF AA plates exhibited approximately 30% increase in strength accompanied with drastic increase in ductility up to about 84% compared to specimen CBE. Analytical predictions were made to numerically assess the advantages of using MF systems where ACI 318-19 outperformed ACI 440.2R-17 due to the sufficient composite behavior that allows the AA plates to behave similar to steel reinforcement such that the section has an additional lever arm. It is concluded that the implementation of epoxy and EAB as an alternative anchorage technique serves as a viable approach in enhancing the strength and ductility of RC beams strengthened with AA plates.
Flexural strengthening of RC beams using aluminum alloy plates with mechanically-fastened anchorage systems: An experimental investigation
Abuodeh, Omar R. (author) / Abdalla, Jamal A. (author) / Hawileh, Rami A. (author)
Engineering Structures ; 234
2021-01-24
Article (Journal)
Electronic Resource
English
Mechanically-fastened hybrid composites for flexural strengthening of steel beams
| Online Contents | 2014
Mechanically fastened hybrid composite strips for flexural strengthening of concrete beams
| British Library Online Contents | 2015
Mechanically fastened hybrid composite strips for flexural strengthening of concrete beams
| Online Contents | 2015