A platform for research: civil engineering, architecture and urbanism
A platform for research: civil engineering, architecture and urbanism
Dry sliding tribological behavior and mechanical properties of Al2024–5wt.%B4C nanocomposite produced by mechanical milling and hot extrusion
Graphical abstract Display Omitted
Highlights Nanostructured Al2024 and Al2024–B4C nanocomposite prepared via mechanical milling. The milled powders formed by hot pressing and then exposed to hot extrusion. Tribological behavior and mechanical properties of samples were investigated. Al2024–B4C nanocomposite showed a better wear resistance and mechanical properties.
Abstract In this paper, tribological behavior and mechanical properties of nanostructured Al2024 alloy produced by mechanical milling and hot extrusion were investigated before and after adding B4C particles. Mechanical milling was used to synthesize the nanostructured Al2024 in attrition mill under argon atmosphere up to 50h. A similar process was used to produce Al2024–5wt.%B4C composite powder. The milled powders were formed by hot pressing and then were exposed to hot extrusion in 750°C with extrusion ratio of 10:1. To study the microstructure of milled powders and hot extruded samples, optical microscopy, transmission electron microscopy and scanning electron microscopy (SEM) equipped with an energy dispersive X-ray spectrometer (EDS) were used. The mechanical properties of samples were also compared together using tension, compression and hardness tests. The wear properties of samples were studied using pin-on-disk apparatus under a 20N load. The results show that mechanical milling decreases the size of aluminum matrix grains to less than 100nm. The results of mechanical and wear tests also indicate that mechanical milling and adding B4C particles increase strength, hardness and wear resistance of Al2024 and decrease its ductility remarkably.
Dry sliding tribological behavior and mechanical properties of Al2024–5wt.%B4C nanocomposite produced by mechanical milling and hot extrusion
Graphical abstract Display Omitted
Highlights Nanostructured Al2024 and Al2024–B4C nanocomposite prepared via mechanical milling. The milled powders formed by hot pressing and then exposed to hot extrusion. Tribological behavior and mechanical properties of samples were investigated. Al2024–B4C nanocomposite showed a better wear resistance and mechanical properties.
Abstract In this paper, tribological behavior and mechanical properties of nanostructured Al2024 alloy produced by mechanical milling and hot extrusion were investigated before and after adding B4C particles. Mechanical milling was used to synthesize the nanostructured Al2024 in attrition mill under argon atmosphere up to 50h. A similar process was used to produce Al2024–5wt.%B4C composite powder. The milled powders were formed by hot pressing and then were exposed to hot extrusion in 750°C with extrusion ratio of 10:1. To study the microstructure of milled powders and hot extruded samples, optical microscopy, transmission electron microscopy and scanning electron microscopy (SEM) equipped with an energy dispersive X-ray spectrometer (EDS) were used. The mechanical properties of samples were also compared together using tension, compression and hardness tests. The wear properties of samples were studied using pin-on-disk apparatus under a 20N load. The results show that mechanical milling decreases the size of aluminum matrix grains to less than 100nm. The results of mechanical and wear tests also indicate that mechanical milling and adding B4C particles increase strength, hardness and wear resistance of Al2024 and decrease its ductility remarkably.
Dry sliding tribological behavior and mechanical properties of Al2024–5wt.%B4C nanocomposite produced by mechanical milling and hot extrusion
Abdollahi, Alireza (author) / Alizadeh, Ali (author) / Baharvandi, Hamid Reza (author)
2013-09-04
11 pages
Article (Journal)
Electronic Resource
English
| British Library Online Contents | 2014
| British Library Online Contents | 2018
| British Library Online Contents | 2012
Wear behavior in Al2024–CNTs composites synthesized by mechanical alloying
| British Library Online Contents | 2012