A platform for research: civil engineering, architecture and urbanism
A platform for research: civil engineering, architecture and urbanism
METHOD OF LIGHTWEIGHT AGGREGATES PRODUCTION FROM WASTE-COAL COMBUSTION ASH
Manufacturing lightweight aggregate (LWA) by a sintering technique requires a delicate balance among three conditions: forming sufficient amount of molten liquid phase during sintering; reaching an appropriate viscosity for solid-liquid suspension; and emitting sufficient amount of gas that can be entrapped by the liquid phase to form pores. LWAs were made from low-calcium and high-calcium Waste Coal Combustion Ash (W-CCA) including fly ash and bottom ash. A mass fraction of at least 40% liquid phase for fly ash and 50% for bottom ash is required for a successful entrapment of emitted gaseous phases during sintering. Larger pores were observed in the microstructure of LWA samples made using high-calcium W-CCA in comparison to low-calcium W-CCA. This result was mainly attributed to the high-calcium samples forming liquid phases with lower viscosity values and emitting higher amounts of gaseous phase during sintering than did the low-calcium samples. The gaseous phase was generated by hematite reduction and anhydrite decomposition.
METHOD OF LIGHTWEIGHT AGGREGATES PRODUCTION FROM WASTE-COAL COMBUSTION ASH
Manufacturing lightweight aggregate (LWA) by a sintering technique requires a delicate balance among three conditions: forming sufficient amount of molten liquid phase during sintering; reaching an appropriate viscosity for solid-liquid suspension; and emitting sufficient amount of gas that can be entrapped by the liquid phase to form pores. LWAs were made from low-calcium and high-calcium Waste Coal Combustion Ash (W-CCA) including fly ash and bottom ash. A mass fraction of at least 40% liquid phase for fly ash and 50% for bottom ash is required for a successful entrapment of emitted gaseous phases during sintering. Larger pores were observed in the microstructure of LWA samples made using high-calcium W-CCA in comparison to low-calcium W-CCA. This result was mainly attributed to the high-calcium samples forming liquid phases with lower viscosity values and emitting higher amounts of gaseous phase during sintering than did the low-calcium samples. The gaseous phase was generated by hematite reduction and anhydrite decomposition.
METHOD OF LIGHTWEIGHT AGGREGATES PRODUCTION FROM WASTE-COAL COMBUSTION ASH
VERFAHREN ZUR HERSTELLUNG VON LEICHTEN AGGREGATEN AUS ABFALL-COAL-VERBRENNUNGSASCHE
PROCÉDÉ DE PRODUCTION D'AGRÉGATS LÉGERS À PARTIR DE CENDRES DE COMBUSTION DE CHARBON RÉSIDUAIRE
BALAPOUR MOHAMMAD (author) / FARNAM YAGHOOB (author) / HSUAN YICK GRACE (author)
2024-01-10
Patent
Electronic Resource
English
Method of lightweight aggregates production from waste-coal combustion ash
| European Patent Office | 2022
Method of Lightweight Aggregates Production from Waste-Coal Combustion Ash
| European Patent Office | 2021
Method of lightweight aggregates production from waste-coal combustion ash
| European Patent Office | 2022
METHOD OF LIGHTWEIGHT AGGREGATES PRODUCTION FROM WASTE-COAL COMBUSTION ASH
| European Patent Office | 2021
Lightweight Aggregates Produced from Waste-Coal Combustion Ash
| European Patent Office | 2023